User's Manual
Bluetooth Modem
Fax Identity Commands
The fax identity commands are AT+FMFR?, AT+FMDL?, AT+FMI?, AT+FMM?, AT+FMR?, and AT+FREV?.
These commands respond back with modem manufacturer, product model, and product revision information.
FAX Identity Commands
Command Function Default Range Reported by
&Vn
+FMDL? Identifies product model none - no
+FMFR? Identifies modem manufacturer none - no
+FMI? Identifies modem manufacturer none - no
+FMM? Identifies product mode none - no
+FMR? Identifies product version none - no
+FREV? Identifies product version none - no
NOTE: To originate a call, answer, and hang up, use the ATD, ATA, and ATHn commands, respectively.
Fax Class 1 Commands¡@
The fax Class 1 AT commands are divided into three types: class selection and capabilities, data stream
transfers, and silence-time timers. All fax mode commands, except the silence-time timers, must be the last
command on the command line.
Each command may be used as follows:
+F<command>? Reads current setting
+F<command> = ? Reads permissible settings
+F<command> = <parameter> Sets parameters
FAX Class 1 AT Commands
file:///C¦/DocumentsandSettings/Alcee/面/ww/Manual.htm(42/43)[2003/2/20､U､ﾈ02:39:39]