User's Manual

ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY
OTHER FORMS WITHOUT PREMISSION FROM BILLIONTON SYSTEM INC
6
2.2 Power/Battery LED Indicator Specification (RED)
# Power / Battery
State
Flashing Pattern COMMENT
1 Power on Flash 6 times
ON (250ms)
OFF (250ms)
Only applied when user power on the
system.
2 Battery Low ON (250ms)
OFF (250ms)
The Battery Low is defined as 3.3V +-
0.1V.
3 Battery Full OFF The Battery Full is defined as 4.15 V.
4 Press and hold
for longer than 2
seconds
Flash 2 times
ON (250ms)
OFF (250ms)
To indicate user to release button, and
then long press function will be workable
5 Press and hold
V+ and V- for
longer than 5
seconds
Flash 2 times
ON (250ms)
OFF (250ms)
To indicate user to release button, and then
Pair operation will be executable
5 Press and hold
Talk and V+ for
longer than 5
seconds
Flash 2 times
ON (250ms)
OFF (250ms)
To indicate user to release button, and then
Pairing removal and reset volume setting will
be executable
2.3 Bluetooth State LED Indicator Specification (BLUE)
# System state Flashing Pattern COMMENT
1 Pairing ON(200ms)
OFF(200ms)
If any mobile devices paired exists,
headset will do auto connection first.
After auto connection, then pairing
function will be workable
2 Standby ON(100ms)
OFF(2400ms)
N/a
3 RFCOMM
connected
ON(100ms)
OFF(900ms)
N/a
4 SCO
Connected
ON(190ms)
OFF(10ms)
N/a
2.4 Sound Indicator Specification
# Action Sound played
1 Power ON Long middle (500ms GS7)
2 Power OFF Long middle (500ms GS7)
3. Transfer Audio V Long high (800ms G6)
3 Press Talk button for 2 seconds Short middle (100ms GS7)
4. Press V- button for 2 seconds Short middle (100ms GS7)
5. Press V+ and V- button for 5 seconds Short high (100ms G6)
6 Volume level reaches the max/Min Short 4 (100ms AS6)
7 Error Long low (500ms G5)
8 Ring tone ring_valkyries
9 Low Battery Indicator Long high (500ms G6)