User's Manual

7
Japan
• All components of the cord set (cord, connector, and plug)
must bear a “PSE” mark and registration number in
accordance with the Japanese Dentori Law.
• The minimum specifications for the flexible cord are: (1) 0.75
mm
2
conductors, (2) Type VCT or VCTF, and (3) 3-conductor.
• The cord set must have minimum rated current capacity of 7 A.
• The attachment plug must be a two-pole, grounded type with a
Japanese Industrial Standard C8303 (15 A, 125 VAC)
configuration.
Other Countries
• The cord set fittings must bear the certification mark of the
agency responsible for evaluation in a specific country.
Acceptable agencies are:
CCC (China)
• The flexible cord must be of a HAR (harmonized) type HO5VV-
F 3-conductor cord with a minimum conductor size of 0.03
square inches.
• The minimum specification for the flexible cord for Class II
product are: (1) 2X0.75 mm
2
conductors, (2) 2-conductor cord.
• The cord set must have a current capacity of at least 10 A and
a nominal voltage rating of 125 / 250 VAC.
This model IS DESIGNED TO USE WITH
THE FOLLOWING AC ADAPTER MODEL ONLY
Manufacture: LI SHIN INTERNATIONAL ENTERPRISE CORP.
Manufacture: Delta
Battery Pack Safety
• The battery pack is intended to use only with this notebook.
• The battery pack is not replaceable by the end user. Only
qualified service technicians should replace the battery pack.
• Do not disassemble the pack.
• Do not dispose of the battery pack in fire or water.
• To avoid risk of fire, burns, or damage to your battery pack, do
not allow a metal object to touch the battery contacts.