User's Manual

6
If no device memory resident, enter pairing mode.
3. After powering on the headset, it enters the pairing mode automatically with the “Pairing
LED indicator” blinking red and blue alternatively and waiting to be paired with another
Bluetooth device for 60 seconds.
4. Your Bluetooth device will indicate that it has found a headset named “BT AV Headset”,
please select it and enter pairing code ”0000”.
5. Once pairing is successful between the stereo headset and the Bluetooth device, the
stereo headset will exit the pairing mode and will be ready to use.
＊Note: The pairing mode for the stereo headset is 60 seconds after powering on.
To enter the pairing mode again please re-power on the headset.
Other Functions
1. Under HSP/HFP mode, button functions:
a. Redial: long press” Forward” Key
b. Talk/End: short press” Stop” Key
c. Reject call: short press “Stop” Key
2. Abnormal disconnection with connected device: headset tries to reestablish link
automatically or triggered by button press on headset.
3. Headset can store pairing information for up to 8 different devices
4. LED indications:
Headset LED indicator Headset status Note
Red/Blue blink alternatively Pairing mode
Blue blink every 3 sec Idle
Blue blink twice every 3
sec
In-connection
Red blink twice every 3 sec Low battery
No indication Sleep mode When Idle for 3 min
5. Audio alert chart:
Headset state Audio indication Note
Vol Max/Min is reached One high tone
Low battery notice Five high tone every 20 sec