User's Manual

Quick Start Guide v.2.1

USB Bluetooth Adapter

Windows Setup:

O/S supported: Win2000 / XP/ Vista.

1. Insert the software CD in the CD-ROM and the installation process will start

automatically

2. Follow the on-screen instruction for software installation

3. Insert the USB dongle into a free USB port of your computer

4. Reboot your computer (if necessary)

5. Start the Bluetooth software

Mac Setup:

1. Make sure your Mac OS is X or above

2. Insert the USB dongle into a free USB port of your Mac

3. Mac OS will install the Bluetooth driver automatically

4. A Bluetooth icon will appear, start the Bluetooth software

5. Please update the Bluetooth software stack from Apple’s Bluetooth support site, if

you have trouble using the USB Bluetooth Adapter

User Guide:

Please refer to the user’s guide in the installation CD.

X:\userguide.pdf

(X stands for the location of the CD-ROM)

You can also read the “Online Help” file by pressing “F1” in the Bluetooth software.

Federal Communication Commission Interference

Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

PAGE 1
Quick Start Guide v.2.1 USB Bluetooth Adapter Windows Setup: O/S supported: Win2000 / XP/ Vista. 1. Insert the software CD in the CD-ROM and the installation process will start automatically 2. Follow the on-screen instruction for software installation 3. Insert the USB dongle into a free USB port of your computer 4. Reboot your computer (if necessary) 5. Start the Bluetooth software Mac Setup: 1. Make sure your Mac OS is X or above 2. Insert the USB dongle into a free USB port of your Mac 3.
PAGE 2
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.