User's Manual
Table Of Contents
- Bluetooth Application Note
- Index
- 1.Bluetooth software installation and basic operations
- Repeat the installation steps for other USB adapters or CF card on other PCs.
- 1.1 Icons used for Bluetooth devices and services?
- 2. Network sharing setting for Windows
- Windows network sharing setting
- PC to PC (Windows 2000 or Windows XP)
- 3. File transfer?setting for Windows
- File transfer setting for Windows
- PC to PC
- Dial-up networking setting for Windows
- Connections are initiated from the client:
- To close a Dial-up Networking connection
- FAX setting for Windows
- To send a Fax
- Connections are initiated from the client:
- 6. PIM Item Transfer setting
- 7. PIM Synchronization setting
- 8. Serial port setting?
- To establish a Bluetooth serial port connection:
- Install Bluetooth on MAC O.S.
- How to pair with my mobile phone?
- (A) Assign COM port
- (B) Configure Bluetooth software
- (C) Configure Ericsson's Phone Monitor
- (D) Configure Ericsson's Mobile Modem Settings
- 1.Bluetooth software installation and basic operations
NOTE:
A soft reset leaves installed applications and
stored data intact, and simply restarts the
device.
A hard reset deletes ALL downloaded
applications on the handheld. See the handheld
computer's documentation for additional
information.
Bluetooth Control Panel: Configuring BTW-CE
BTW-CE provides a Control Panel to adjust Bluetooth settings.
To access the Control Panel, tap the Bluetooth icon in the lower-right corner of
the Today screen.
BTW-CE can have multiple saved configurations. Individual configuration sets
are saved in profiles, which can be quickly loaded to meet the appropriate
situation.
The Control Panel has seven tabs. All tabs are not visible on the screen at the
same time; use the arrows to the right of the tab names to scroll back-and-forth
and expose the different tabs.
There are server tabs in the control panel:
* General
User profile selection
Bluetooth status (ON/OFF) indicator