User's Manual
Table Of Contents
- Bluetooth Application Note
- Index
- 1.Bluetooth software installation and basic operations
- Repeat the installation steps for other USB adapters or CF card on other PCs.
- 1.1 Icons used for Bluetooth devices and services?
- 2. Network sharing setting for Windows
- Windows network sharing setting
- PC to PC (Windows 2000 or Windows XP)
- 3. File transfer?setting for Windows
- File transfer setting for Windows
- PC to PC
- Dial-up networking setting for Windows
- Connections are initiated from the client:
- To close a Dial-up Networking connection
- FAX setting for Windows
- To send a Fax
- Connections are initiated from the client:
- 6. PIM Item Transfer setting
- 7. PIM Synchronization setting
- 8. Serial port setting?
- To establish a Bluetooth serial port connection:
- Install Bluetooth on MAC O.S.
- How to pair with my mobile phone?
- (A) Assign COM port
- (B) Configure Bluetooth software
- (C) Configure Ericsson's Phone Monitor
- (D) Configure Ericsson's Mobile Modem Settings
- 1.Bluetooth software installation and basic operations
Note: Consult the MIS personnel in your company for proxy setting if
necessary.
For setting up the Proxy to surf the Internet via a Bluetooth Access Point:
1. Click on "Start" button, click "Settings", and "Connections" tab. Click on the
"Connections" icon.
2. Change the "My network card connects to:" drop-down list to "Work",
change the "When needed, automatically connect to Work using these
settings:" drop-down list to "Work Settings", and click "Modify".
3. Click on the "Proxy Settings" tab, and select both checkboxes, then enter
the Proxy IP address obtained from your MIS personnel.