User's Manual

Email attachments. The only option is include or do not include attachments
with email that is sent or received on this computer using this service.
8. Serial port setting
The Bluetooth Serial Port service allows two Bluetooth devices to establish a
wireless connection through virtual communications ports and then use that
connection as if it were a hardwired serial cable between the devices.
To establish a Bluetooth serial port connection:
Connections are initiated from the client:
1. On the client, in the Folders pane of "My Bluetooth Places", select "Entire
Bluetooth Neighborhood".
2. In the right pane of "Entire Bluetooth Neighborhood", right-click
anywhere except on a device name and select "Refresh" from the pop-up
menu.
3. In the Folders pane of "My Bluetooth Places", right-click the server you
want to establish a connection with and select "Discover Available Services"
from the popup menu to update the available services list. The available
services will be displayed in the right pane of "My Bluetooth Places".
4. In the right pane of "My Bluetooth Places", double-click "Bluetooth Serial
Port". A dialog box appears that contains the communications port number
assigned to this connection by the client. The application that will use this
connection must be configured to send data to this port.
Depending on the security configuration, the dialog box that provides
communications port information may not appear until after Authentication and
Authorization have been accomplished.
The application on the server must be configured to use the correct
communications port.
To determine the communications port being used by the service:
* On the server, in the Folders pane of "My Bluetooth Places", right-click "My
Device" and select "Properties" from the pop-up menu
* In the "Bluetooth Configuration Panel", select the "Local Services" tab.
* Double-click the "Bluetooth Serial Port" service to display its "Service
Properties" dialog box. The "Service Properties" dialog box shows the
communications port the connection is using.
To close a Bluetooth serial port connection
Connections are normally closed from the client: