User's Manual
Table Of Contents
- Bluetooth Application Note
- Index
- 1.Bluetooth software installation and basic operations
- Repeat the installation steps for other USB adapters or CF card on other PCs.
- 1.1 Icons used for Bluetooth devices and services?
- 2. Network sharing setting for Windows
- Windows network sharing setting
- PC to PC (Windows 2000 or Windows XP)
- 3. File transfer?setting for Windows
- File transfer setting for Windows
- PC to PC
- Dial-up networking setting for Windows
- Connections are initiated from the client:
- To close a Dial-up Networking connection
- FAX setting for Windows
- To send a Fax
- Connections are initiated from the client:
- 6. PIM Item Transfer setting
- 7. PIM Synchronization setting
- 8. Serial port setting?
- To establish a Bluetooth serial port connection:
- Install Bluetooth on MAC O.S.
- How to pair with my mobile phone?
- (A) Assign COM port
- (B) Configure Bluetooth software
- (C) Configure Ericsson's Phone Monitor
- (D) Configure Ericsson's Mobile Modem Settings
- 1.Bluetooth software installation and basic operations
* On the client, in the Folders pane of "My Bluetooth Places", select
(highlight) the device that is providing the "Bluetooth Serial Port" service.
* In the right pane of "My Bluetooth Places", right-click "Bluetooth Serial
Port" and then select "Disconnect Bluetooth Serial Port" from the pop-up
menu. Though not recommended, connections can also be closed from the
server:
* On the server, in the Folders pane of "My Bluetooth Places", select
(highlight) "My Device".
* In the right pane of "My Bluetooth Places", right-click "Bluetooth Serial
Port" and then select Stop to close the service. The service must be re-started
before it will be available to remote devices (right-click Bluetooth Serial Port
and select Start from the pop-up menu).
9. ActiveSync setting
ActiveSync setting for Windows
1.Right-click on Bluetooth Configuration icon from the toolbar in the desktop
window. Select Setup and then open Configuration window.
2. Select Local Service tab from the Bluetooth Configuration window. In the
Service Properties window, please learn by heart the current COM port this
computer uses, for example: COM 6, in order to identify this value with the
configuration of Microsoft ActiveSync later.