User's Manual
Table Of Contents
- Bluetooth Application Note
- Index
- 1.Bluetooth software installation and basic operations
- Repeat the installation steps for other USB adapters or CF card on other PCs.
- 1.1 Icons used for Bluetooth devices and services?
- 2. Network sharing setting for Windows
- Windows network sharing setting
- PC to PC (Windows 2000 or Windows XP)
- 3. File transfer?setting for Windows
- File transfer setting for Windows
- PC to PC
- Dial-up networking setting for Windows
- Connections are initiated from the client:
- To close a Dial-up Networking connection
- FAX setting for Windows
- To send a Fax
- Connections are initiated from the client:
- 6. PIM Item Transfer setting
- 7. PIM Synchronization setting
- 8. Serial port setting?
- To establish a Bluetooth serial port connection:
- Install Bluetooth on MAC O.S.
- How to pair with my mobile phone?
- (A) Assign COM port
- (B) Configure Bluetooth software
- (C) Configure Ericsson's Phone Monitor
- (D) Configure Ericsson's Mobile Modem Settings
- 1.Bluetooth software installation and basic operations
Server window
(13) The received file should be placed on the C: drive of the server system
(default location).
How to HotSync with Palm Bluetooth SDIO and Tungsten T
Please make sure you have installed Bluetooth software and Palm Desktop on
your notebook or desktop PC before proceeding to the setup instructions
below.
(1) From the Palm main panel, tap the HotSync icon.
(2) Tap HotSync and select "Connection Setup" from the menu bar.
(3) Tap "New".
(4) Give the new connection a name, e.g. BTConnection.
(5) Change "Connect to:" to "PC".
(6) Change "Via:" to "Bluetooth".
(7) The "Device:" option will pop up, tap to find the Bluetooth system you wish
to HotSync with.
(8) Select the Bluetooth system you wish to HotSync with and tap OK.