User's Manual

User*s Manual
5.5 H
OW DO
I
DETERMINE THE VERSION NUMBER OF THE
B
LUETOOTH
S
PECIFICATION THAT THE
H
OST
C
ONTROLLER
I
NTERFACE
(HCI)
COMPLIES WITH
?
In the Bluetooth Configuration Panel, on the Hardware tab, in the Device Properties
section, the fifth entry provides Bluetooth Specification compliance information for the
Host Controller Interface.
The sixth entry contains the Specification Revision information for the Host Controller
Interface, if appropriate.
5.6 H
OW DO
I
DETERMINE THE VERSION NUMBER OF THE
L
INK
M
ANAGER
P
ROTOCOL
(LMP)?
In the Bluetooth Configuration Panel, on the Hardware tab, in the Device Properties
section, the seventh entry provides Link Manager Protocol version number information.
The eighth entry contains the Link Manager Protocol sub-version number information, if
appropriate.
5.7 H
OW
d
O
I
FIND INFORMATION ABOUT THE
B
LUETOOTH HARDWARE ATTACHED TO MY
COMPUTER
?
In the Bluetooth Configuration Panel, select the Hardware tab.
5.8 H
OW DO
I
TEST A
N
ETWORK
A
CCESS CONNECTION
?
If the client is hardwired to the LAN, unplug the hardwired connection to ensure that the
test checks the wireless connection rather than the hardwired connection. If the server
has access to the Internet, open a browser on the client and connect to the World Wide
Web. You may also Ping the server from the DOS prompt.
5.9 W
HY DO
I
GET AN
U
NKNOWN
P
ORT MESSAGE WHEN
I
ATTEMPT TO USE A
B
LUETOOTH
S
ERIAL
P
ORT
?
The
“Unknown Port”
error message usually means an attempt was made to connect a
port that was in use.
Additional Bluetooth Serial Ports can be added if they are required.
P(14)網頁