DL12/13/14/18 Owner’s Manual BILLY GOAT DL TRUCK LOADER VACUUM Owner's Manual DL1201L, DL1301H, DL1401SE, DL1801V, DL1801VE Accessories INTAKE HOSE REPLACEMENT KIT Standard on DL units. [8"(203mm) x 10' (3.0m)] [10”(254mm) X 10’(3.0m)] 8” Hose P/N 811244 10” Hose P/N 791033 Part No 812379 EXHAUST EXHAUST HOSE KIT [7"(203mm) x 5' (1.5m)] flexible hose increases exhaust distance.
DL12/13/14/18 Owner’s Manual CONTENTS SPECIFICATIONS AND SOUND/VIBRATION 3 INSTRUCTION LABELS 4 PACKING CHECKLIST ____________ 5 ASSEMBLY AND MOUNTING 6 OPERATION 7 MAINTENANCE________________________________ 8 TROUBLE SHOOTING__________________________________________________9 ILLUSTRATED PARTS & PARTS LISTS 10-12 Go to http://www.billygoat.com for French-Canadian translations of the product manuals. Visitez http://www.billygoat.
DL12/13/14/18 Owner’s Manual Specifications DL1201L Engine: HP DL1301H DL1401SE DL1801V DL1801VE 12 (8.95 kW) 13 (9.69 kW) 14 (9.69 kW) Engine: Model HK291150124P-BPQE2 GX390U1QA2 EX400DE5030 3564420186EI 3564470288B1 Engine: Type LCT OHV HONDA SUBARU BRIGGS AND STRATTON BRIGGS AND STRATTON 6 qt. (5.68 L) 6.9 qt. (6.5 L) 7.4 qt. (7.0 L) 9qt. (8.52 L) 9qt. (8.52 L) Engine: Fuel Capacity 18 (13.4 kW) 18 (13.4 kW) Engine: Oil Capacity 0.875 qt. (0.8 L) 1.16 qt. (1.1 L) 1.3 qt.
DL12/13/14/18 Owner’s Manual INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT DL Vacuum. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.
DL12/13/14/18 Owner’s Manual PACKING CHECKLIST Your Billy Goat is shipped from the factory in one carton and is completely assembled except for the exhaust elbow, nozzle, handle loop for nozzle, hose booms, hose bands, hose coupler, hose clamps and related hardware. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box.
DL12/13/14/18 Owner’s Manual ASSEMBLY 1. SECURELY ATTACH unit to the bed of a truck, trailer, or use the hanging brackets, so that the exhaust discharges into an enclosed container. NOTE: This unit must be securely mounted to the bed of a truck or to a trailer before operating. See page 14 for parts diagram to assemble 2. ATTACH hose to housing intake, using hose quick clamp (item 8) making sure to place the safety switch under the clamp (see interlock page 12.
DL12/13/14/18 Owner’s Manual VACUUMING OPERATION EXHAUST DIRECTION & DISTANCE: Exhaust direction and distance are controlled by the rotation of the exhaust elbow. Typically debris is aimed to discharge to the rear of the container. The direction of discharge is adjusted by rotating the exhaust elbow on the housing and securing with the hardware provided. NOTE: Elbow is heavy. Use caution when adjusting. Never stand directly under the elbow while adjusting direction of exhaust.
DL12/13/14/18 Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every use Every 5 hours (daily) Every 10 Hours Every 25 Hours z Inspect for loose, worn or damaged parts. Check engine oil and air filter z Clean hose z Engine (See Engine Manual) z Inspect battery for damage or leak z Keep engine free of debris z Check battery terminal for corrosion z Check for excessive vibration IMPELLER REMOVAL 1.
DL12/13/14/18 Owner’s Manual Troubleshooting Problem Abnormal vibration. Engine will not start. Possible Cause Loose or out of balance impeller or loose engine · Nozzle buried in debris. Clogged hose or exhaust. Excessive quantity of debris. · Throttle & / or stop switch in off position. Out of gasoline. Bad or old gasoline. Spark plug wire disconnected. Harness wire is bad or disconnected from interlock switch. Hose not installed, allowing interlock wire to ground. Dirty air cleaner.
DL12/13/14/18 Owner’s Manual PARTS DRAWING DL 56 57 60 43 63 27 9 10 46 59 14 65 36 DL18VE MODEL 47 12 11 48 53 1 71 46 31 52 18 77 69 43 30 26 6 54 13 68 42 67 70 17 20 21 7 19 8 76 63 21 23 44 27 55 DL18V MODEL 47 36 33 TO ENGINE 66 34 35 43 22 46 16 48 1 39 71 46 69 77 68 31 29 45 41 40 24 67 70 50 51 35 ON 28 103 DL18V MODEL 43 30 26 5 64 49 3 61 28 41 40 25 41 38 46 4 47 2 32 15 1 43 46 62 14 53 80 79 ON D
DL12/13/14/18 Owner’s Manual PARTS LIST ITEM NO.
DL12/13/14/18 Owner’s Manual SCREWCAP 5/16-18 X 2" HCS ZP DL1201L PART NO.