Owners manual

E4
-
WM5
-
Y542A00
MOUNTING INSTRUCTION
created: 01.08.18 E4-WM5-Y542A00_0 Page 7 of 15 latest revision:
N. Apply non-permanent thread locker on the end of each of the screw threads of the OE sway bar bolts
that were removed in Step K. Then place these bolts through the counterbore’d holes in the supplied
sway bar spacer (BOM item #6) and thread into the threaded holes in the frame using a 14mm socket
(2 per side) as shown in the image below.
Torque OE sway bar bolts to service manual specification.