Instructions for use


Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t
change the page numbering. Keep the language
integrity.
Fax [phone]
Trouble
Possible reasons
Shooting Way
The humidifier is not working.
No power supply
Connect power supply, switch
on
The humidifier is on, but no
vapour is coming out
No water in water tank
Fill water into water tank
Security switch is too slight
Make the switch tight
Abnormal smell mist
New unit
Take out water tank, open
cover, let it stay 12 hours in
cool position
Dirty water or long time
staying water
Cleaning water tank, fill in
clear water
The appliance is on, but the
humidifier is not working.
Too much water in the water
basin
Pour away some water from the
water basin, closed the cover of
water tank tightly
Mist fog is too small
Too much scum in the water
basin
Clean transducer
Water is too dirty or water kept
too long in the tank
Clean water tank, change to
fresh clear water
Abnormal noise
Resonant in water tank when
water is too less
Fill water into water tank
Unit is on an unstable surface
Move the unit to a stable flat
surface
Mist coming out from around
nozzle
There are apertures between the
nozzle and water tank
Dip the nozzle in water for a
while and then fix it to the
socket on water tank
13/32
Assembly page 13/32