manual


Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar (Italy).
The pages must be reproduced and folded in order to obtain
a booklet A5 (+/- 148.5 mm width x 210 mm height). When
folding, make sure you keep the good numbering when you
turn the pages of the I/B. Don’t change the page numbering.
Keep the language integrity.
10 / 28
Assembly page 10/16
Fax [phone]
Vertical inclination (high-low): it is regulated by gripping the motor body and orienting it in
the direction desired; tighten the screw (10) to lock the motor housing to the desired position.
When not in use for long periods, the plug must always be removed from the socket.
CLEANING AND MAINTENANCE
Attention: before normal cleaning, remove the plug from the socket.
• Ensure that the fan is switched off from the supply mains before removing the guard (15).
• Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or other liquid: if this should happen, do not put
your hand in the liquid, but first remove the plug from the socket. Carefully dry the appliance
and make sure that all the electrical parts are dry: in the case of doubt, ask for professionally
qualified help.
• It is essential that the motor's air holes be kept from dust and lint.
• Periodically check the electric cord for damage; its replacement requires a special tool:
contact an authorized service center, also for any repairs.
• If the fan will not be used for long periods, it must be protected from dust and humidity; we
recommend storing it in its original packaging.
• Should you decide not to use the appliance any more, we recommend making it inoperative
by cutting the power cord (after making sure you have disconnected the plug from the
socket) and make dangerous parts harmless if children are allowed to play with them (such
as the blade).
• Do not dispose of non-biodegradable products in the environment but dispose of them in
accordance with current law. At the end of its working life, the product must not be disposed
of as urban waste. It must be taken to a special local authority differentiated waste collection
centre or to a dealer providing this service. Disposing of a household appliance separately
avoids possible negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. Keep in mind that: -the ring nut, control panel,
the fan and the body are plastic. -the grille, the feet, adjustable and fixed pole are metal. -
wires of copper covered with rubber. –Electric motor is of iron and copper made.