Owner's manual

IntelliSense

Manual

Connecting to the SIM

The SIM connects to the USB port of a PC or Data Gateway with the USB programming cable or through a USB se-

rial hub.

Direct connection – Connect the RJ-45 connector of the programming cable (CBL-IS-RU-1.8) to the port

labeled “PC” on the SIM and the other end to a free USB port on the PC or Data Gateway. With everything

powered on, the USB connector will turn a solid green when connected to a properly working SIM and two

sensors.

Figure 9: SIM Direct Connect

Through Serial Hub – Connect the RJ-45 connector of the serial cable (CBL-IS-RD-XX) to the PC port on the

SIM, and the DB9 connector to one of the free ports on the serial (ISH-D04). The hub is then connected to a

free USB port on the PC or data gateway. With the serial hub, it is possible to connect up to four SIMs to a

single USB port.

Figure 10: SIM serial hub connection

To PC or Gateway