Owner's manual

IntelliSense
®
Manual
8
Data Logging and Remote Monitoring / with PLC Discrete Input (appendix drawing 3 and 4)
With this setup the user may connect to the SIM unit through the Data Gateway and visually monitor the current
status of the SIM unit and attached pressure system. This setup also allows for data logging to be performed and
stored in the Data Gateway unit, regardless of a user PC connection. If using the discrete outputs, the SIM must be
powered using option b.
Functionality
• Cylinder condition monitoring based on status LEDs on SIM unit
• Data Gateway remains connected for data logging
• User PC connects to Data Gateway for initial conguration and/or real time monitoring of the SIM unit and
attached pressure system
• Use of EOT outputs with PLC installation and use of power option b
List of Components
Required Bimba Products
• IntelliSense
®
Basic Kit- [ISK-BMA-xxx]
o 1 - IntelliSense
®
Sensor Interface Module (SIM) [ISM-S1-BA1-5P]
o 2 - IntelliSense
®
pressure / temperature sensor [ISS-1A-7SS]
o 2 - IntelliSense
®
Tee ttings [ISF-T1-xxx]
• 2 - IntelliSense
®
sensor cable [CBL-IS-M8-x]
• 1 - USB programming cable [CBL-IS-RU-1.8]
• 1 – IntelliSense
®
Data Gateway [ISG-01]
Optional Bimba Products
• 1 – 24 VDC Power supply [PWR-024A24-DIN] (if not supplied by user)
• 1 - IntelliSense
®
0.5 meter IO cable [CBL-IS-CF-0.5] (for EOT or power option a)
• 1 – IntelliSense
®
Junction Block [ISH-R04] (for power option b)
User Supplied
• 12-24 VDC power source (if not using Bimba option)
• Computer for setup of IntelliSense
®
SIM
Optional
• PLC that will accepts a NPN (sinking) sensor (for use of EOT inputs)
Basic Monitoring with MODBUS RTU Network / with PLC Discrete Inputs (appendix drawing 5 and 6)
With this setup the user may connect to the SIM through PC port and visually monitor the current status of the SIM
unit and attached pressure system. By conguring a Modbus RTU network between the user’s PLC (Master Device)
and the SIM unit(s) (Slave Device) the user can retrieve desired status values and alerts. If using the discrete outputs,
the SIM must be powered using option b.