User's Manual

Answer a cellular call
Press <Cellular> or <Speaker> to answer the incoming cellular call.
End a call
During a call, either home or cellular call, press <Talk off> or put the handset on the base cradle.
Adjust volume
During a call, press <Up/Down> to adjust the volume.
Mute
- During a call, press <Mute/Clear> to mute the microphone, so that you can talk to someone else in the
room without your caller hearing you.
- Press <Mute/Clear> again to resume the microphone.
Dial from the redial list
- Press <Down/Redial> and then scroll <Up/Down> to the entry you want to redial.
- Press <Talk on> or <Speaker> to dial the number from home line.
OR
- Press <Cellular> to dial the number from cellular line.
Dial from the calls list
- Press <Right/CID> and then scroll <Up/Down> to the entry you want to dial.
- Press <Talk on> or <Speaker> to dial the number from home line.
OR
- Press <Cellular> to dial the number from cellular line.
Add entry to phonebook
- Press <Left/PB> and press <Menu> to select ADD.
- Press <Menu> and enter the name.
- Press <Menu> and enter the number.
- Press <Menu> to save.
Dial from the phonebook
- Press <Left/PB> and then scroll <Up/Down> to select the entry you want to dial.
- Press <Talk on> or <Speaker> to dial the number from home line.
OR
- Press <Cellular> to dial the number from cellular line.
Personal Settings
Menu Map
Main
Menu
DATE
& TIME
PHONEBOO
K
INTERCOM SETUP HS SETUP BS SETUP
CELLULAR
ANSWER
MACHINE
RESET
SETTINGS
Sub
Menu
DATE
TIME
VIEW
ADD
EDIT
DELETE
DELETE ALL
PB CAPACITY
SPEED DIAL
RINGER TONE
RINGER VOLUME
KEY TONE
LOW BATT TONE
OUT RANGE TONE
HANDSET NAME
LANGUAGE
LCD CONTRAST
AUTO TALK
REGISTRATION
DIAL MODE
FLASH TIME
AREA CODE
ANSWER MODE
MESSAGE ALERT
NUMBER OF
RINGS
ANNOUNCEMENT
RECORD MEMO
CALL SCREENING
REMOTE ACCESS
SECURITY CODE
CLR VOICE MAIL
ALL SETTINGS
1. Press <Menu>.
2. Press <Up/Down> to scroll through the menu.
3. Press <Menu> to open a sub-menu or validate an option.
Press <Talk off/Back> to go back to previous menu level or cancel an action.
If you do not press any button on the handset for 30 seconds, the display will automatically return to standby. It
will also return to standby when the handset is placed on the base or charger.
Registration
Up to 5 handsets can be registered to one base. The original handset is pre-registered to use. Additional
handsets must be registered to the base before you can use them.