User's Manual

Using the phone 15
• Press MENU to confirm. Display will show
CELLULAR READY? .
• Refer to section 3.2.1 to proceed with the next steps.
NOTE
When pairing a new
cellular, the connected cellular will be
disabled temporarily.
3.2.3 Paired Devices
The cellular(s) paired up will be displayed in the paired
devices list, no matter it(they) is(are) connected or not. You
can choose to connect, or remove the cellular from this menu.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
PAIRED DEVICES .
2. Display will show the Cellular name of paired device(s) .
NOTE
Display will show
NO PAIRED DEVICE if there is no device
paired up.
3. Press MENU and then VOL+ or REDIAL/VOL- to select
the desired cellular device.
For the connected cellular device:
4. Press MENU to remove the cellular device.
5. Press MENU to confirm.
For the cellular phone that is not connected:
4. Press MENU and then VOL+ or REDIAL/VOL- to select
CONNECT or REMOVE CELLULAR .
5. Press MENU to confirm. If you select REMOVE CELLULAR ,
press MENU again to confirm.
NOTE
• When the connected cellular is removed, corresponding
device or will be off.
• When the disconnected cellular is connected,
corresponding device or will be on.
• When the cellular is removed, the device name will be
removed and
EMPTY will be displayed instead in the
paired device list.
3.3 Making a home call using your
landline
1. Enter the phone number and press /FLASH or /
SPEAKER to dial the phone number.