User's Manual

Overview of your Parent unit
5
6
4
2
1
3
1 Sound Level LED
3 GREEN and 2 RED LEDs turn on and off in real
time to indicate the noise level in baby's room.
When audio is being picked up by microphone of
baby unit, the LEDs light up to in indicate audio level
with reference to the sensitivity setting. The more
LEDs light up, the stronger the sound is.
No LED lights up means the sound level in baby's
room does not exceed the thresholds set through the
parent unit.
The LEDs are also used for indicating the speaker
volume setting on parent unit. The louder you set the
speaker volume, the more LEDs light up.
2 Link Indicator
On when the parent unit is powered on and linked to
the baby unit.
Flashes when the parent unit is out of range from
baby unit.
Off when the parent unit is powered off.
3Power
Press and hold to power on/off the parent unit.
4 Volume +
Press to increase the speaker volume.
5Volume -
Press to decrease the speaker volume.
6 Charging Indicator
On steadily when in charging mode.
Flashes when low battery is detected.
NOTE
Off even if connected with power adapter but without
battery pack installed.