User's Manual

14 CLEANING
6. CLEANING
Clean MBP16 with a slightly damp cloth or with an anti-
static cloth. Never use cleaning agents or abrasive
solvents.
Cleaning and care
Do not clean any part of the product with thinners or
other solvents and chemicals - this may cause
permanent damage to the product which is not covered
by the warranty.
Keep your MBP16 away from hot, humid areas or
strong sunlight, and don't let it get wet.
Every effort has been made to ensure high standards of
reliability for your MBP16. However, if something does
go wrong, please do not try to repair it yourself - contact
Customer Service for assistance.
7. TROUBLESHOOTING
Link light on the parent unit does not come on
Check whether the parent unit is powered on.
Check whether the supplied rechargeable batteries are
correctly installed and that they are not drained.
Recharge the parent unit by connecting it to the power
supply.
Link light on the parent unit flashes
The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 1.5 meter.
The baby unit may be switched off. Press and hold
0
key to switch on the baby unit.
Low battery light on the parent unit flashes
Rechargeable batteries in the parent unit are running
low. Connect the parent unit to the mains power with the
supplied power adapter for recharging.
The parent unit beeps
Lost connection with the baby unit. Reduce the distance
between the parent unit and the baby unit, but not
closer than 1.5 meter.
The baby unit may be switched off. Press and hold
0
key to switch on the baby unit.