User's Manual

10 GETTING STARTED
3. Insert the supplied battery pack, and fit the battery
pack into the compartment.
4. Reattach the battery compartment cover, and reinstall
the belt clip (refer to section 2.3).
5. Insert the power adapter with bigger pin plug into the
side of the parent unit.
6. Connect the other end of the power adapter to the
mains socket.
7. The Charging Indicator comes on.
NOTE
Only use the provided power adapter.
2.3 Belt clip on parent unit
1. Attach the belt clip to the lock slots on the back sides.
2. On normal state, the belt clip could be hanged on the
belt directly.
3. Lift up the belt clip and rotate 180°, then the parent unit
could stand on the desk. Do NOT hang on the human
body.