User's Manual

32
33
Using the phone
Press MENU to select DIAL MODE.
Press MENU and then VOL+ or REDIAL/VOL- to
select TONE or PULSE.
Press MENU to save.
NOTE
If the pulse mode is selected, press TONE/
*
to switch
from pulse to tone dialing temporarily when dialing
out. After the call is ended, the dial mode will change
back to pulse.
3.16.2 Setting the ash time
The default ash time is 600MS. It is unlikely that you
should need to change this setting unless advised to
do so.
Press MENU and then VOL+ or REDIAL/VOL- to
select SETUP BS.
Press MENU and then VOL+ or REDIAL/VOL- to
select FLASH TIME.
2.
3.
4.
1.
2.
Press MENU and then VOL+ or REDIAL/VOL- to
the ash time you want. (8 options are available :
90, 100, 110, 250, 300, 400, 600 and 700MS)
Press MENU to save.
3.16.3 Setting the area code
Press MENU and then VOL+ or REDIAL/VOL- to
select SETUP BS.
Press MENU and then VOL+ or REDIAL/VOL- to
select AREA CODE.
Press MENU and then enter the area code.
Press MENU to save.
3.
4.
1.
2.
3.
4.