User's Manual

Help

3.19 Paging/Finding a handset

Press FIND on the base. All handsets registered to

the base will ring.

To stop the paging, press FIND again, or press any

key on the handset, or place the handset on the base.

4. Help

The icon is not scrolling when the handset is

placed on the base

Handset not properly seated on the base cradle

-readjust the handset on the base.

Dirty contact - clean the charge contacts by wiping

with an alcohol moistened cloth.

Battery is full - charging is not necessary at this

time.

No dial tone

If there is no base power, check the connections.

Reset the phone by unplugging then plugging it

back into an electrical outlet.

If the handset batteries are empty, recharge the

battery pack for at least 24 hours.

Move the handset closer to the base.

Be sure to use only the provided telephone cords.

•