User's Manual

Table Of Contents

Getting to Know Your Buddy

2.11 Recalibrate the Touch Screen

Your parent unit uses a built-in G-Sensor that changes

the screen orientation based on the way you hold the

parent unit. If you feel that the screen orientation does

not respond properly to the way you hold the parent unit,

you can recalibrate the screen as follows:

Press

H and then tap Settings > Display > G-Sensor

Calibration, and follow the on-screen instructions.

2.12 Overview of the Docking Station

1 CHARGE LED - RED

Lights up when the parent unit is put into the docking

station for charging.

2 IN USE LED

Lights up when the parent unit is out of the cradle.

3 CHARGE

For charging the parent unit battery.

Note

• To use your Baby unit and Parent Unit together, you

must be able to establish a wireless link between them,

• The range will be affected by environmental conditions.

• Any large metal object, like a refrigerator, a mirror, a

filing cabinet, metallic doors or reinforced concrete

between the Baby and Parent Unit and the

adio signal.

• The signal strength may also be reduced by other

solid structures, like walls, or by radio or electrical

equipment, such as TVs, computers, cordless or

mobile phones, fluorescent lights or dimmer switches.

• Use of other 2.4GHz products, such as other wireless

networks (Wi-Fi routers), Bluetooth

systems, or

microwave ovens, may cause interference with this

product, so keep it at least 5ft (1m) away from these

types of products, or turn them off if they appear to be

causing interference.

• If the signal is weak, try moving the Baby and/or the

Parent Unit unit to different positions in the rooms.

or a Wi-Fi link to them both.

Wi-Fi

router may block the r