User's Manual

Setting Up
3.1 Connecting the Buddy Parent
Unit Docking Station
IMPORTANT
The docking station must be plugged into an electrical
outlet at all times. Only use the adapter supplied with the
product.
1. Plug one end of the power cable into the power socket
on the bottom of the docking station.
2. Plug the other end into a power outlet.
IMPORTANT
Use only the power adapter supplied with the product.
3.2 Installing and Charging the Parent
Unit Battery Pack
1. Hold the parent unit with both hands and the front panel
facing down. Gently press the back cover with your
thumbs, and then slide it down until it disengages from
the parent unit.
2. Remove the back cover completely.
3. Place the supplied rechargeable battery pack into the
battery compartment, with the battery connector
plugged in, as shown.
Power cable
6
3. Setting Up