User's Manual

Table Of Contents
Help
My parent unit does not recognise the memory
card.
Make sure that you have inserted a certified memory
card.
Make sure that you have inserted the memory card
correctly. See page 8 on how to insert a memory card.
My parent unit shows a low-battery warning.
The parent unit is low on power and needs to be
charged before you can use it. See page 7 on how to
charge your parent unit.
The display on my parent unit freezes or does not
respond.
Turn the parent unit off and turn it on again.
is not scrolling when my parent unit is placed
on the base.
Incomplete battery contact - adjust the parent unit on
the docking station.
Dirty contact - clean the battery contact by wiping with
an alcohol moistened cloth.
Battery is full - charging is not necessary at this time.
Noise interference on your radio or television.
Your base may be too close. Move it as far away as
possible.
There is no sound when the headset is connected
to my parent unit.
Unplug and reconnect the headset. Make sure that
the connector is pushed in all the way.
The volume may be deactivated or set too low.
Make sure your headset has a compatible 3.5mm
3-pole connector.
39