User's Manual

Parent Unit Menu Options 17
ENGLISH
4.6 Set Screen Off time for the Parent Unit
You can set the screen off time for the Parent Unit after it is in idle mode for a
specific time interval.
1. Press M when the Parent Unit is in camera viewing mode.
2. Press
< or to scroll to .
3. Press or to select (
60mins , 30mins , 5mins or OFF ).
4. Press O to confirm your selection.
4.7 Zoom, Pan or Tilt
You can zoom in or out while viewing the image from Baby Unit.
1. Press to zoom in.
2. Press and hold
<, , or to move the zoomed image left, right, up
or down correspondingly.
3. Press to zoom out.
4.8 Pair and Replace a Baby Unit
The Baby Units and Parent Unit provided are already paired. You can add or
replace a Baby Unit in your video and audio monitoring system.
You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby
Unit must be paired to the Parent Unit before use.
To pair and replace a Baby Unit:
1. Press M when the Parent Unit is in camera viewing mode.
2. Press
< or to scroll to .
3. Press or to choose a desired Baby Unit number, then press O. The
pairing mode starts.
4. Tur n on th e n ew Ba by Un it , an d then immediately press and hold Pair until
the Power/Link indicator turns on.
NOTE
If you choose a Baby Unit number that is already occupied, the new Baby Unit
will replace the existing Baby Unit.