A17 4.2.4 Camera settings You can change the Camera settings by tapping the Setting icon Camera page. (Picture A18) on the • Tap on Camera Details to review Camera Name, Change Image & Firmware version.
A20 4.2.5 ENGLISH • Tap on Notification Sensitivity to set the sensitivity of motion detection. (Picture A20) A21 General setting • Tap Settings on General page. • Tap on General Settings to shift the format of Clock (12hr/24hr). (Picture A21) • Tap on Do Not Disturb, set the timer which you prefer and select ON, the Camera will not send any alert to your Android™ device in the duration of your setting. 4.2.
A22 A23 Photo/Video - Take a photo or record a video from your Camera. Tap Video icon to activate the video function and press the red dot to start and release to stop recording.
A26 Note: Photos and videos will be stored in the internal flash memory of your device for Android™, they can be accessed from Gallery or Media Player. To play videos, please use the “Hubble for Motorola Monitors” application or a 3rd party application, such as MX player (i.e. Google Play™ Store), which is able to play MJPG (Motionjpeg). Camera 29 ENGLISH Tap Camera icon to switch to Camera mode, you can capture photos from camera view.
4.3 Camera Functions: Working with devices for iPhone®/iPad® • Run the Hubble for Motorola Monitors application on your iPhone®/iPad®. • The Camera view appears on the screen. 4.3.1 Add more cameras • On Camera view, tap on the Motorola logo to go to Add Camera page. (Picture i15) • Tap on Add Camera to add one more camera follow steps of iPhone®/iPad® setup 3.3.4. (Picture i16) • Once the Camera has been added, the Camera view will be automatically displayed.
Remove a camera ENGLISH 4.3.2 You can remove a camera from your account by following these steps: • Tap the Setting icon (Picture i17) on General page, then tap on Remove Camera. • Select Remove to delete the unit from camera list. (Picture i18) i17 4.3.3 i18 Change your Account Information You can change the account information using iPhone®/iPad®. • Tap Account on General page, the account setting appears on screen.
i19 4.3.4 Camera settings You can change the Camera settings to tap the Setting icon on General page (Picture i20), to review Camera Name and Firmware version (Picture i21), also you are allow to change camera name when tap on existing name following the instruction.
General settings ENGLISH 4.3.5 • Tap Settings on General page. (Picture i22) • Tap on General Settings to shift the format of Clock (12hr/24hr). (Picture i23) i22 i23 • Tap on Notification Sensitivity to set motion detection. (Picture i24) i24 i25 • Tap on Do Not Disturb, set the timer which you prefer and select ON, the Camera will not send any sound or alert to your iPhone®/iPad® in the duration of your setting.
4.3.6 Hubble for Motorola Monitors Settings • Tap on Settings on your iPhone®/iPad®, and the applications will appear, tap on Hubble for Motorola Monitors App , the settings in the Hubble for Motorola Monitors app will be shown on screen. (Picture i26) i26 4.3.7 Features of the Hubble for Motorola Monitors Application On Camera view, tap the viewing area, Function Icons will appear as following, Take Picture Tap Camera icon to capture photos from camera view.
ENGLISH Pan and Tilt Function Tap the up and down buttons to tilt, the left and right buttons to pan.
4.4 Camera Functions: Working with PC/Notebook • Go to URL: http://www.hubbleconnected.com/motorola/login/ • Enter your User Name and Password and then click Login if you have already created an account. • Click on the Camera list paired in your account via Android™ device or iPhone®/iPad®, and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming.
ENGLISH 5. Procedure for resetting the Camera Note: If your Camera is moved from one router (e.g. home) to another router (e.g. office) or you have Camera setup issues, then this Camera must be reset again. Please reset the Camera with the following procedure: 1. 2. 3. 4. Unplug the Power Adapter. Press and hold the PAIR button on the underside of the Camera, then plug the Power Adapter to the mains power socket, the LED indicator turns ON.
6. Help Noise interference To avoid video interruption, ensure that there is enough distance between your device and the Wi-Fi ® Camera Unit. Use of other 2.4 GHz products, such as Bluetooth® systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi® Camera Unit at least 1.5m away from these types of products, or turn them off if they appear to be causing interference. Lost connection Check your Wi-Fi® settings. If necessary reconnect your Wi-Fi®.
What do I do if I forgot Click on the "Forgot Password" link on my password? the http:// www.hubbleconnected.com/ motorola/login/ website OR your Android™ or iOS application. An email will be sent to your registered email address. Account I am unable to receive a 1. new password although I have used the "Forgot 2. password" option. The e-mail might have been sent to your Junk Mail Folder. Please check your Junk Mail Folder. There might be a delay in getting your e-mail.
Connectivity My Phone application Issues displays the following message: "Unable to connect to BMS server". 1. 2. 3. 4. Check the Wi-Fi ® network strength. Check if you are connected to the internet by starting the phone browser and going to a website like www.google.com. Try again if you are successful connecting to the internet. Plug the LAN wire into RJ45 socket directly and connect to the internet in case the Wi-Fi ® signal is not good.
What is the significance of LED flashing? A blinking LED indicates the following status: Rapid blinking: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in setup mode. To reset to setup mode, press and hold the PAIR button on the bottom of the Camera until the LED indicator flashes rapidly. Slow blinking: 2. The Camera is either connecting to the router or lost the link to the router.
Connectivity Even though I am Issues accessing my Camera from the same Wi-Fi ® network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. Please check your wireless router settings. For example, in Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. Camera When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do? Please upgrade your firmware. This takes around 5 minutes.
How do I download the Android™: APP for Android™ and - Open Google Play App on your iOS devices? Android™ device - Select Search - Type "Hubble for Motorola Monitors" - The results will have Hubble for Motorola Monitors App by Binatone - Select to install it iOS Device: - Open iOS APP Store™ - Select search - Type "Hubble for Motorola Monitors" - The results will have Hubble for Motorola Monitors App by Binatone - Select to install it Setting up When the video is cut off, the application attempts to recon
7. General Information If your product is not working properly.... 1. 2. Read this User's Guide. Contact Customer Service at: US and Canada 1-888-331-3383 Email: support@motorolamonitors.com Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Products Covered Consumer Products Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information? To obtain service or information, please call: US and Canada 1-888-331-3383 Email: support@motorolamonitors.
FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. The Unit shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 8 inches (20 cm) or more.
ENGLISH 8. Technical Specifications Camera Unit Wi-Fi ® 802.11 b/g/n Image sensor Colour CMOS 1M Pixels Lens f = 2.3 mm, F = 2.4 IR LED 8 pcs Power Adapter: Zhongshan Baolijin Electronic Co.,Ltd.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Mac, Mac OS, iPhone, iPad and Safari are the trademarks of Apple Inc., registered in the U.S. and other countries. Android, Google Play and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.