USER’S GUIDE Wi-Fi® Home Video Camera Model: FOCUS73, FOCUS73-2, FOCUS73-3, FOCUS73-4 The features described in this user’s guide are subject to modifications without prior notice.
Welcome... to your new Motorola Wi-Fi® Home Video Camera! Thank you for purchasing your new Motorola Wi-Fi® Home Video Camera. If you have always wondered what happens when you are away, wonder no more. Now you can monitor your children, pets or property with this easy to use system. You can install the Camera only from your iPhone®/iPad® or devices for Android™ and view the Camera video from your PC or Notebook, as well as devices for Android™ or iPhone®/iPad®.
Overview of your Camera 1 2 6 7 5 4 9 3 8 10 1. 2. 3. 4. 5. 6. Antenna Wall mount base Infrared LEDs (for night vision) Camera Lens Light Sensor (for night mode detection) PAIR Button Power / Status Indicator Dome Shape Cover 9. Power connection socket 10. LAN interface* (Adaptive Enthernet Interface for connecting with various network devices,such as hub,touter,etc.) 7. 8. * It is for LAN cable (not included) connection when Wi-Fi connection is reachable.
Table of contents 1. 2. 3. Safety Instructions .....................................................................................5 System Requirements ............................................................................... 9 Getting started - Connecting Devices.................................................... 10 3.1 3.2 3.3 4. Camera .................................................................................................... 22 4.1 4.2 4.3 4.4 5. 6. 7. 8. 4 Setup...............
ENGLISH 1. Safety Instructions WARNING: STRANGULATION HAZARD - In case this unit is being used to monitor infants or children, keep the unit and adapter cord more than 1 metre from the cot and out of their reach. Never place camera or cords within a cot or near a bed. Secure the cord away from children's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
WARNING This Wi-Fi® Camera Unit is compliant with all relevant electromagnetic field standards and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device. • Adult assembly is required due to small parts. Keep all small parts away from children. • This product is not a toy. Do not allow children to play with it. • This Wi-Fi® Camera Unit is not a substitute for responsible adult supervision.
ENGLISH the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the supplied plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your location, consult your camera dealer or local power company.
• Ventilation - Slots and openings on the case are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the camera equipment on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register.
ENGLISH 2. System Requirements Web Portal • Windows® systems, 7 or 8 (Java browser plug-in needed) • Mac OS® version 10.7 or above • Internet Explorer® version 8.0 or above • Firefox® version 11.0 or above • Chrome™ version 18.0 or above • Safari® version 5.1 or above • Java™ version 7 or above Android™ System • Version 4.0 or above iPhone®/iPad® iOS • Version 7.
3. Getting started - Connecting Devices How does it work? Access your Camera locally View your Camera from any compatible device remotely When a user tries to access the Camera, our secure server authenticates the user’s identity and permits access to the Camera. 3.1 Setup Connect the Camera to the power adapter, then plug into an suitable mains power socket and make sure the power switch is in the ON position. The Camera must be within range of the Wi-Fi® router with which you want to connect it to.
User Account and Camera Setup on Android™ Devices ENGLISH 3.2 What you need • FOCUS73 camera • FOCUS73 camera power adapter • Device with Android™ system version 4.0 or above 3.2.1 Power on and connect the FOCUS73 camera • Connect the FOCUS73 adapter to a suitable mains power socket, insert the power adapter plug into the socket of the Power Cable. • The camera’s green LED blinks after the camera has finished booting. 3.2.
3.2.3 Run Hubble for Motorola Monitors App on Android™ device • Ensure your Android™ device is connected to your Wi-Fi® router. • Run Hubble for Motorola Monitors application and key in your Hubble for Motorola Monitors account information, select “I agree to the Terms of Use” before you tap on Create. (Picture A1) Note: If you have Hubble for Motorola Monitors account, please select Already have a Account? to go next steps.
Add FOCUS73 Camera to your account ENGLISH 3.2.4 • New account created and directly login. • Tap on Add Camera. (Picture A2) • Tap on Continue. (Picture A3) A2 A3 • On the screen, it shows the setup instructions.
• Press and hold the PAIR button for 3 seconds at the side of FOCUS73 camera and the indicator will flash rapidly. Then tap on Search for Camera. • The App auto searching and connecting your Camera as below pictures. (A5 & A6) A5 A6 ® • Select Wi-Fi Network and tap Continue, enter password then tap on Connect.
A9 Getting started - Connecting Devices ENGLISH • Connecting Camera to Wi-Fi® Network, it needs a few minutes to try connecting and then it will show connection result (Picture A9, A10). If connection failed, please tap on the Retry button and repeat the steps starting at 3.2.4.
• Tap on Watch Live Camera to view camera video and the LED indicator will turn on. (Picture A11) • Tap on Hubble logo and go back to the camera list.
User Account and Camera Setup: Working with iPhone®/iPad® ENGLISH 3.3 What you need • FOCUS73 camera • FOCUS73 camera power adapter • iPhone® / iPad® with iOS 7.0 version or up 3.3.1 Power ON and Connect FOCUS73 camera • Connect the FOCUS73 adapter to a suitable mains power socket, insert the plug into the socket of the Power Cable. • Camera green LED blinks after camera booting finish, it means the camera is ready for setup. 3.3.
3.3.4 Add FOCUS73 Camera to your account • New account created and directly login. • Tap on Add Camera. (Picture i2) • Tap on “FOCUS73”. (Picture i3) Blink83 / Scout83 / MBP36HD FOCUS73 i2 i3 • Tap on Continue and follow the instructions (5 steps) as below.
ENGLISH i6 i7 • Follow the steps above to locate the Camera with identification "CameraHDxxxxxxxxxx" then tap on Continue.
• Select Wi-Fi® Network to tap Continue then enter password to tap Next. (Pictures i9, i10) i9 i10 • It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status (Pictures i11, i12). If connection fails, please tap on the Retry button and repeat 3.3.4 as instructed above.
ENGLISH • Press Watch Live Camera to view Camera video. (Picture i13) • Tap on Hubble logo to go back to Camera list.
4. Camera 4.1 Install your Camera and setting up A. Fixing Mounting Plate on the wall. • Mark the position of the screw holes on the wall. • Drill 4 holes and hammer the drywall plugs (included) into the holes as needed. • Fasten the mounting plate on the wall with the 4 Philips head screws (provided). B. Hanging the Camera unit on the Mounting Plate. • Place the 4 mounting slots of the camera base on to 4 catches on the mounting plate.
ENGLISH D. Connecting Power Supply for the Camera Unit • Insert the power adapter plug into the Power Socket and connect other end of the power adapter to a suitable mains power socket. • Connect either via LAN cable to your router/ hub/modem or Wi-Fi® to your router. • The LED indicator will light up.
4.2 Camera Functions: Working with devices for Android™ • Run the Hubble for Motorola Monitors application on your Android™ device. • The Camera view appears on the screen. 4.2.1 Add more cameras • On Camera view, tap on Hubble logo to go to Add Camera page. (Picture A13) • Tap on Add Camera to add one more camera follow steps of Android™ device setup 3.2.4. (Picture A14) • Once the Camera has been added, the Camera view will be automatically displayed. A13 4.2.
ENGLISH A15 4.2.3 A16 Change your Account Information You can change the account information using Android™ device. • Tap Account on General page, the account setting appears on screen. (Picture A17) • Tap on Change Password to change your password following the instruction. • Tap on Log Out to leave the account. • Tap on Freemium plan, it will go to the link of Cloud Video Recording Service, to obtain more information, please visit our website http://www.hubbleconnected.com.