USER’S GUIDE MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad BABY MONITOR USER’S GUIDE The features described in this user’s guide are subject to modifications without prior notice.
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of your Parent unit 11 1 12 13 9 8 7 2 3 4 1. 2. 3. 4. 5. 6. 7. 14 6 5 Display Menu key ( ) Left / Vol - key Microphone Down / Video On-Off key Right / Vol + key Sound level LED indicator 10 8. 9. 10. 11. 12. 13. 14. Up/Talk key Power/Channel*/Enter key Power adapter connector Belt clip Speaker Battery cover screw Battery cover *This function is only available for multi-pack version with more than one camera.
Overview of your Camera unit 1 5 7 6 2 4 3 1. 2. 3. 4. 5. Power LED Infrared LEDs Light sensor Microphone Camera lens 6. On/Off switch 7. Speaker Important guidelines for installing your Baby Monitor • • • • • To use your video monitor camera and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
1. 2. 3. Safety Instructions ..................................................................... 6 Getting started ............................................................................ 8 2.1 2.2 2.3 2.4 2.5 Using the Camera Unit ............................................................. 13 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4. Setting up .................................................................................
1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the adapter cord out of baby's reach. NEVER place camera or cords within the cot / crib. Secure the cord some distance away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. CAMERA SET UP & USE: ● Determine a location for the CAMERA that will provide the best view of your baby in his cot / crib. ● Place the CAMERA on a flat surface, such as a dresser, bureau, or shelf.
ENGLISH • Do not place the camera unit or cables in the cot / crib or within reach of the baby (the unit should be at least 3 feet away). • Keep the cords out of reach of children. • Do not cover the baby monitor with a towel or blanket. • Never use extension cords with power adapters. Only use the power adapters provided. • Test this monitor and all its functions so that you are familiar with it prior to actual use. • Do not use the baby monitor near water.
2. Getting started 2.1 Camera unit power supply 1. Connect the small plug of the power adapter to the Camera unit and the other end to the mains socket (110V/60Hz). NOTE Only use the enclosed power adapter. 2. Switch the unit to ON and a green light will display. 3. Slide the switch to OFF to turn the Camera unit off.
Parent unit battery installation ENGLISH 2.2 screw Red Black 1. 2. Turn the belt clip so that it is in the hanging position. Loosen the screw in a counterclockwise direction using a small screwdriver. Remove the battery cover. 3. Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment. 4. Close the battery compartment and tighten the screw in a clockwise direction. 5. Press to turn ON the parent unit.
2.3 Parent unit power supply IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure. 1. Connect the small plug of the power adapter to the parent unit and the other end to the mains socket (110V/60Hz) NOTE Only use the enclosed power adapter. 2. The LCD screen illuminates and starts up automatically after a few seconds. 3. Press and hold to turn OFF the parent unit.
Registration The baby monitors are already pre-registered upon your purchase. You do not need to register one again unless a Camera unit loses its link with the parent unit, or you want to register an additional Camera unit. Up to 4 Camera units can be registered to one parent unit. If you have more than one Camera unit, please check that you have selected the correct channel at the Parent unit for that Camera unit before you attempt to register it again.
2.5 De-registration To remove the registration record of particular camera unit from the parent unit, follow the procedure below with the cameras are powered on and within operating range: 1. One the Parent unit, press to enter menu mode. and until is selected on the LCD screen. 2. Press 3. Press or to select the camera to de-register. 4. Press and hold the key 2 seconds for de-registration confirmation.
3.1 Setting up • Place the Camera unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the Camera unit until you are satisfied with the image in the parent unit. • To mount the Camera unit on the wall, see section “9. Wall mounting instructions” for more details.
3.2 Selecting a camera channel or Enable Multivideo display (for multi-pack only) The Parent unit has 4 camera channels ( 1/ 2/ 3/ 4) from which the video can be displayed and the audio heard. Each Camera unit is paired with a camera number 1, 2, 3 or 4 when it is registered to the parent unit, and the parent unit shows the number of the selected channel at the top right of the display.
Adjusting the volume of the parent unit + When the video is playing or in standby mode, press to decrease volume or to increase volume. The display will show the current volume setting for 5 seconds. NOTE The parent unit also provides a visual indication of the sound level detected at the Camera unit, regardless of the volume setting. - 3.7 Push 3.8 Video On/Off Function to switch on or off the display. Camera Scan Mode Display will change every 15s between different registered camera channel.
4. MBP31, MBP31 Twin, MBP31 Triple, MBP31 Quad Parent Unit Menu Options 4.1 Brightness This option lets you change the brightness of the LCD. 1. Press to enter menu mode. or until is selected on the LCD screen. 2. Press 3. Press or to adjust the LCD brightness level. The LCD brightness will be adjusted accordingly. ( ) + - 4.
At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.
7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the parent unit and unplug both the units’ electrical power, then plug them back in. • Is the unit turned on? Press and release on the parent unit to turn it on. • Is the correct camera channel number selected? Change the camera channel number, if necessary. F Registration If the Camera unit has lost its link with the parent unit • Try recharging or replacing the battery pack.
ENGLISH 8. General Information If your product is not working properly.... 1. Read this User’s Guide or the Quick Start Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service at: US and Canada 1-888-331-3383 To order a replacement battery pack, contact customer service or visit our website.
What will BINATONE do? BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that does not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products.
FCC and IC regulations FCC Part l5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this equipment.
General Information 25 ENGLISH Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillage radioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003.
Technical Specifications Camera unit Frequency 2.4GHz to 2.4835GHz Image sensor Colour CMOS Lens f 2.5mm, F 2.8 IR LED 9 pcs Power Adaptor: By Keenocean; Type: S04-003-0050-00600; Input: 100-240VAC, 50/60Hz Output: 5V, 600mA or Adaptor: By Ten Pao Industrial Co., Ltd.
Frequency 2.4GHz to 2.4835GHz Display 2.4" TFT LCD Display colours 16.7M colour LCD Brightness control 5 steps Power Adaptor: By Keenocean; Type: S04-003-0050-00600; Input: 100-240VAC, 50/60Hz Output: 5V, 600mA or Adaptor: ENGLISH Parent unit By Ten Pao Industrial Co., Ltd. Type: S004LB0500060 (for UK) S004LV0500060 (for EU) S004LU0500060 (for US) Input: 100-240VAC, 50/60Hz Output: 5VDC, 600mA Battery: By Desay; Type: Ni-MH AAA 850mAh 3.
1. ENGLISH 9. Wall mounting instructions Use the template below to mark the wall in the correct places to drill holes for wall-mounting screws (not supplied). 4mm 8mm headscrew head screw 60.00mm (Tolerence 1.0mm) 4mm 9.
Insert 4mm head screws (not supplied) into the holes and tighten the screws. Then, align your Camera unit with the screws and push it down. 3. Point the camera lens towards the area you want to monitor. Adjust the Camera unit until you are satisfied with the image in the parent unit. Wall mounting instructions 31 ENGLISH 2.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2012 Motorola Mobility LLC. All rights reserved. Version 1.
