USER’S GUIDE MBP41, MBP41/2, MBP41/3, MBP41/4 BABY MONITOR USER’S GUIDE The features described in user's guide are subject to modifications without prior notice.
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP41, MBP41/2, MBP41/3, MBP41/4. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 10 11 12 14 1 15 2 6 3 7 4 8 5 9 18 16 19 17 13 1. Display (LCD screen) 2. Up Key + Normal Mode: Tilt Up Menu Mode: Up 3. Down Key Normal Mode: Tilt Down Menu Mode: Down 4. Left Key < Normal Mode: Pan Left Menu Mode: Left 5. Right Key > Normal Mode: Pan Right Menu Mode: Right 6. Menu Key M Press to open the Menu options 7. OK Key O 8. Video ON/OFF Key V Press to turn OFF the LCD display Press again to turn ON the LCD display 9.
Parent unit menu icons (cont’d) Volume Level Control (8 Levels) * Brightness Level Control (8 Levels) & Lullaby Control (5 Song Selections) m Zoom Level Control (1X, 2X) Z Alarm Setting (6h, 4h, 2h, OFF) A Cam Control (scan, view, add, del) C Overview of Your Baby Unit 6 1 2 3 9 4 10 5 7 1. Photo Sensor (Night Vision Mode) 2. Camera Lens 3. Infared LEDs 4. Power LED 5. Microphone 8 6. 7. 8. 9. 10.
1. Safety Instructions ......................................................................... 6 2. Getting Started ............................................................................... 8 2.1 2.2 2.3 2.4 Baby Unit Power Supply.................................................................8 Parent Unit Battery Installation .......................................................8 Parent Unit Power Supply ..............................................................9 Registration (Pairing).....
1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the adapter cord out of baby's reach. NEVER place camera or cords within the crib. Secure the cord some distance away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. CAMERA SET UP & USE: ● Determine a location for the CAMERA that will provide the best view of your baby in his crib. ● Place the CAMERA on a flat surface, such as a dresser, bureau, or shelf. ● NEVER place camera or cords within crib.
CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Safety Instructions 7 ENGLISH • Never use extension cords with power adapters. Only use the power adapters provided. • Test this monitor and all its functions so that you are familiar with it prior to actual use. • Do not use the baby monitor near water. • Do not install the baby monitor near a heat source. • Only use the chargers and power adapters provided.
2. Getting Started 2.1 Baby Unit Power Supply 1. Connect the small plug of the power adapter to the baby unit and the other end to the electrical outlet. NOTE Only use the enclosed power adapter (5.9V DC / 1000mA). 2. Slide the ON/OFF switch to the ON position. The power LED will light up in green. 3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off. 2.2 Parent Unit Battery Installation Black Red 1.
2.3 ENGLISH 2. Replace the battery cover over the compartment and gently tighten the screw in a clockwise direction using a Small cross head or Flat end screw drivers. Parent Unit Power Supply IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure. 1. Connect the small plug of the power adapter to the parent unit and the other end to the electrical outlet.
When charging 1. During power OFF, when adapter is plugged in, a adapter logo will display on screen and then a flashing battery logo will display for 45 sec. The Blue LED at top left corner light up indicates adapter is plugged in. 2. During power ON, when adapter is plugged in, the battery icon on screen's top right corner will show that the battery is charging. The Blue LED at the top left corner light up indicates adapter is plugged in. 2.
3.1 Setting up • Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the baby unit's head angle by rotating the camera up, down, left and right until you are satisfied with the image in the parent unit. NOTE Do not place the baby unit within baby's reach! If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment. 3.
3.4 Talk Mode Press and hold the T TALK button on the parent unit to talk to your baby through the baby unit's loudspeaker. The T icon will be displayed at the top of the LCD screen. 3.5 Video ON/OFF Press V VIDEO ON/OFF key to turn the LCD display on or off, but will still leave the audio monitor on.
4.1 ENGLISH 4. MBP41 Parent Unit Menu Options Volume 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until * is highlighted. 3. Press the + UP button or - DOWN button to select the desired volume level from level 1 ~ 8. (The default volume level setting is level 4.) 4.2 Brightness 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until & is highlighted. 3.
4.5 Camera Control 4.5.1 Add (pair) a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted, and the del/add/view/scan menu will pop up. 3. Press the + UP button or - DOWN button to select ADD, and press the OK button to confirm. 4. CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or DOWN button to select the desired CAM, and press the OK button to start searching for a camera unit.
the OK button to confirm. 4. CAM 1/CAM 2/CAM 3/CAM 4 will pop up, press the + UP button or DOWN button to select the desired CAM, and press the OK button to delete that registration. 4.5.4 Scan camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted, and the del/add/view/scan menu will pop up. 3. Press the + UP button or - DOWN button to select SCAN, and press the OK button to confirm. 4.
5. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
Clean the MBP41 with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP41 away from hot, humid areas or strong sunlight, and don't let it get wet. • Every effort has been made to ensure high standards of reliability for your MBP41.
7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the parent unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on? Press and hold the ON/OFF key P on the parent unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF key V to turn it on.
Noise interference on your parent unit • Your baby and parent units may be too close. Move them farther apart. • Make sure there is at least 3 to 6 feet between the 2 units to avoid audio feedback. • lf the baby unit is too far away it may be out of range, so move the baby unit closer to the parent unit. • Make sure the baby and parent units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
8. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service: US and Canada 1-888-331-3383 To order a replacement battery pack, contact customer service or visit our website. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that does not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Products Covered Consumer Products Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for Ninety (90) days from the date returned to the consumer, whichever is longer.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The socket-outlet shall be installed neat the equipment and shall be easily accessible.
Technical Specifications Baby unit (Model: MBP41BU) Frequency 2.4GHz to 2.48GHz Image sensor color CMOS 0.3M Pixels Lens f 2.5mm, F 2.8 IR LED 8 pcs Power Adapter: 5E-AD 059100-U; Input: 100-240V, 50/60Hz 300mA; Output: 5.9V, 1000mA OR Adapter: BLJ5W059100P; Input: 100-240V, 50/60Hz 150mA; Output: 5.9V, 1000mA WARNING Use only with provided power supply.
Frequency 2.4GHz to 2.48GHz Display 2.4" diagonal TFT LCD Display colors 16.7M color LCD Brightness control 8 steps Volume control 8 steps Power Adapter: 5E-AD 060050-U; Input: 100-240V, 50/60Hz 300mA; Output: 6.0V, 500mA ENGLISH Parent unit (Model: MBP41PU) OR Adapter: BLJ5W060050P; Input: 100-240V, 50/60Hz 150mA; Output: 6.0V, 500mA WARNING Use only with provided power supply. OR Battery: Model - TFL3X44AAA900, NI-MH AAA 3 x 1.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2012 Motorola Mobility LLC. All rights reserved. Version 1.