User’s Guide Digital Video Baby Monitor Models: MBP483, MBP483-2, MBP483-3, MBP483-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing the MBP483. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 5 6 1 2 3 7 4 8 1. 2. 3. Power ON/OFF button 0 Press and hold to turn the Parent Unit on or off. Press to turn the screen on or off. Sound Level indicators Show the sound level detected by the Baby Unit - the louder the sound detected, the more LEDs light up. Control key panel UP / VOLUME+ Press to increase speaker volume. When in a menu, press to scroll up. When viewing a zoomed image, press and hold to move the image upwards.
Parent Unit menu icons Connection Status (4 Levels) displays when strong signal is detected between the Baby Unit and the Parent Unit. or displays when moderate signal is detected between the Baby Unit and the Parent Unit. flashes when the Parent Unit is out of range with the Baby Unit. displays when the link between the Parent Unit and the Baby Unit is lost. Patrol mode - Displays when the Parent Unit is in patrol mode.
Overview of Your Baby Unit 1 2 3 4 5 6 7 8 9 1. 2. 3. 4. 5. 6. Power ON/OFF switch 7. Slide to turn the Baby Unit on or off. Microphone Infrared LEDs (6) 8. Light Sensor (Night Vision Mode) 9. Camera Lens Power/Link indicator Lights up in green when the Baby Unit is turned on and linked to the Parent Unit. Flashes in green when the Baby Unit is searching for the Parent Unit, or in pairing mode. Off when the Baby Unit is powered off. Pair Key Press and hold to pair with the Parent Unit.
Table of contents 1. 2. Safety Instructions .................................................................................... 7 Getting Started ....................................................................................... 10 2.1 2.2 2.3 2.4 3. Using the Baby Monitor .......................................................................... 14 3.1 3.2 3.3 3.4 3.5 4. 6 Setting Up .................................................................................................
ENGLISH 1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft away). Do not remove this tag. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
BABY UNIT SET UP & USE: • • • Determine a location for the Baby Unit that will provide the best view of your baby in his/her cot. Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots in the underside of the stand. NEVER place the Baby Unit or cords within the cot.
ENGLISH • Do not touch the plug contacts with sharp or metal objects. • Connect the power adapters to easily accessible electrical outlets. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to their instructions. Use only the rechargeable battery pack with rating: 3.
2. Getting Started 2.1 Baby Unit Power Supply ON/OFF switch 1. 2. 3. 4. Insert the DC plug of the power adapter into the DC socket on the back of the Baby Unit. Connect the other end of the power adapter to a suitable electrical outlet. Slide the ON/OFF switch to the ON position. The power LED lights up in green. Slide the ON/OFF switch to the OFF position to switch off the Baby Unit. NOTE Only use the supplied power adapter (6V DC / 500mA).
Parent Unit Battery Installation A rechargeable battery pack is supplied and should be installed and charged, so that the Parent Unit can be moved without losing the link and picture from the Baby Unit(s). Charge the battery in the Parent Unit before using it for the first time or when the Parent Unit indicates that the battery is low (flashes in red). BLACK 1. 2. 3. RED Remove the battery compartment cover.
2.3 1. 2. Parent Unit Power Supply Insert the DC plug of the power adapter into the DC socket on the side of the Parent Unit. Connect the other end of the power adapter to a suitable electrical outlet. The battery status indicator lights up in green. IMPORTANT Only use the supplied power adapter and battery pack. While the Parent Unit can work with the power adapter connected, without a battery pack, it is recommended that you install and charge the rechargeable battery pack fully before use.
Desktop Stand of the Parent Unit ENGLISH 2.4 Flip the stand on the back of the Parent Unit to set up the desktop stand.
3. Using the Baby Monitor Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible adult supervision. 3.1 Setting Up • Make sure that the Baby Unit and Parent Unit are both switched on. • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor.
Night Vision Mode The Baby Unit has 6 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the top of the unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The icon will be displayed at the top of the screen. 3.5 Turn off Parent Unit LCD Screen You can turn off the Parent Unit screen without switching off the Parent Unit.
4. Parent Unit Menu Options 4.1 Adjust Speaker Volume You can adjust the speaker volume from Volume 1 to Volume 5, or turn it off. Press + or - on the Parent Unit when it is in camera viewing mode. When the speaker volume is set to off, the screen displays . 4.2 LCD Brightness You can adjust the brightness of the Parent Unit screen from Level 1 to Level 5. 1. Press M when the Parent Unit is in camera viewing mode. 2. Press 3. Press O to confirm your selection. is displayed. 4.
Set lullaby ENGLISH 4.3.1 You can to play lullabies on the Baby Unit to comfort your baby. 1. 2. 3. 4. Press M when the Parent Unit is in camera viewing mode. to scroll to . Press < or Press or to choose your desired lullaby. Press O to confirm your selection. 4.4 Monitor the Temperature Your Baby Unit measures the surrounding temperature. If the detected temperature goes beyond a desired temperature range, you will hear an alert tone.
4.4.3 Temperature Alert You can set whether to receive an alert when the room temperature goes beyond the temperature range. 1. 2. 3. 4. 5. 4.5 1. 2. 3. 4. 5. Press M when the Parent Unit is in camera viewing mode. Press < or to scroll to . Press or to scroll to and press the O button. Press or to choose On or Off. Press O to confirm your selection. Remove a Baby Unit Press M when the Parent Unit is in camera viewing mode. Press < or to scroll to .
Pair and Replace a Baby Unit The Baby Units and Parent Unit provided are already paired. You can add or replace a Baby Unit in your video and audio monitoring system. You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby Unit must be paired to the Parent Unit before use. To pair and replace a Baby Unit: 1. 2. 3. 4. Press M when the Parent Unit is in camera viewing mode. Press < or to scroll to . Press or to choose a desired Baby Unit number, then press O. The pairing mode starts.
5. Disposal of the Device (environment) At the end of the product’s life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the Product, User’s Guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
ENGLISH 6. Cleaning Clean your Baby Monitor with a slightly damp or anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the Warranty. • Keep your Baby Monitor away from hot, humid areas or conditions, strong sunlight and avoid moisture.
7. Troubleshooting Power/Link Indicator on the Parent Unit does not come on • Check whether the Parent Unit is powered on. • Check whether the supplied battery pack is correctly installed and that they are charged. • Recharge the Parent Unit by connecting it to the power supply. Power/Link Indicator on the Baby Unit flashes • The Baby Unit may not be paired with the Parent Unit. Refer to section 4.8 to pair the Baby Unit. • The Parent Unit and the Baby Unit may be out of range with each other.
The baby monitor system produces a high-pitched noise • The Parent Unit and the Baby Unit are too close to each other. Make sure the Parent Unit and Baby Unit are at least 3 feet away from each other. • The speaker volume of the Parent Unit may be set too high. Decrease the volume of the Parent Unit. Battery pack in the Parent Unit is running low quickly • The LCD brightness may be set too high. Try to decrease the brightness level. Refer to section 4.2 for details.
8. General Information lf your product is not working properly.... 1. 2. 3. Read this User’s Guide or the Quick Start Guide. Visit our website: www.motorolahome.com/support Contact Customer Service at US and Canada 1-888-331-3383 E-mail: support@motorolahome.com To order a replacement battery pack, contact customer service.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Products Covered Consumer Products Length of Coverage One (1) year from the date of the Products’ original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the Accessories’ original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information? To obtain service or information, please call: US and Canada 1-888-331-3383 E-mail: support@motorolahome.
FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. FCC/IC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
ENGLISH 9. Technical Specifications Baby Unit Frequency 2405-2475 MHz Image sensor Colour CMOS 1M Pixels Operating Temperature IR LED 0oC - 45oC 6 pcs Power Adapter Ten Pao Internationa l Ltd. ( S003GU0600050) Input: 100-240V AC, 50/60Hz, 150mA; Output: 6.0V DC, 500mA WARNING Use only with supplied power supply. Parent Unit Frequency 2405 - 2475 MHz Operating Temperature Display 0oC - 45oC 2.8" diagonal TFT LCD Brightness control 5 steps Battery Rating 3.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2016 Motorola Mobility LLC. All rights reserved. US_EN Version 1.
