User’s Guide Digital Video Baby Monitor Models: MBP622, MBP622-2, MBP622-3, MBP622-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing this Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 8 9 10 1 14 POWER 11 2 6 13 7 15 5 4 1. 2. 3. 4. 5. 6. 12 3 Display (LCD screen) Up/Volume+ Button Press to increase sound volume. Press to scroll up menu options/ settings. Press to tilt up in zoom mode. Down/Volume- Button Press to decrease sound volume. Press to scroll down menu options/ settings. Press to tilt down in zoom mode. Return Button Press to return to previous menu level. Press to pan left in zoom mode.
Parent Unit menu icons Signal Level Indication (3 Levels) No signal from the Baby Unit - out of range or turned off N Night Vision Mode (Video also changes to Black/White) Battery Level Indication (4 Levels) * Volume Level Control (8 Levels + Off) Brightness Level Control (8 Levels) Alarm Setting (6h, 4h, 2h, OFF) Select Camera to view Add Camera Delete Camera Camera scan mode set Zoom Select - icon displays when in Zoom (2X) mode.
Overview of Your Baby Unit 1 2 5 7 1. 2. 3. 4. 5. 8 Photo Sensor (Night Vision Mode) Camera Lens Infrared LEDs (8) Power LED ON/OFF Switch 4 3 6 6. Power Adapter Socket 7. Pair Key 8. Microphone Important guidelines for installing your Baby Monitor • To use your Video Monitor Baby and the Parent Unit together, you must be able to establish a radio link between them, and the range may be affected by environmental conditions.
1. 2. Safety Instructions ..................................................................................... 7 Getting Started........................................................................................ 10 2.1 2.2 2.3 2.4 3. Using the Baby Monitor........................................................................... 14 3.1 3.2 3.3 4. Setting Up .................................................................................................. 14 Night Vision Mode.....................
ENGLISH 1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Do not remove this tag. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
CAMERA SET UP & USE: • • • Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib. Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots in the underside of the stand. NEVER place the Baby Unit or cords within the crib.
ENGLISH • Do not touch the plug contacts with sharp or metal objects. • Connect the power adapters to easily accessible electrical outlets. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to their instructions.
2. Getting Started 2.1 1. Baby Unit Power Supply Insert the small plug of the Power Adapter into the socket at the back of the Baby Unit (Camera) and plug the other end into a suitable electrical outlet. NOTE Only use the enclosed Power Adapter (6V DC / 500mA) with the slightly larger DC plug. 2. 3. 2.2 Slide the ON/OFF switch to the ON position. The power LED will light up in green. Slide the ON/OFF switch to the OFF position to switch off the Baby Unit.
2. 2.3 ENGLISH Small cross-head or flat-head screwdriver. Place the battery cover over the compartment and gently tighten the screw in a clockwise direction using a small cross-head or flat-head screwdriver. Parent Unit Power Supply IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended. This will allow the Parent Unit to operate on battery in the event of a power failure, or when moving to a different room. 1. 2. 3.
4. 5. If there is no connection or you are out of range, the video display will go off, the symbol will flash on the LCD screen, and the unit will beep every 9 seconds. (If the unit is on scan the 1 ? symbol displays.) Move the Parent Unit closer to the Baby Unit to re-establish the link. Press and hold the POWER ON/OFF button P until the progress bar scrolls across fully, to turn OFF the Parent Unit.
Registration (Pairing) The Baby Monitor Camera is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedure below: 1. 2. 3. Press the button on the Parent Unit and then press the - DOWN button to select the ADD CAMERA icon , and press the button to confirm.
3. Using the Baby Monitor 3.1 Setting Up • Make sure the Baby Unit and Parent Unit are both switched on. • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the Baby Unit’s head angle by rotating the camera up, down, left and right until you are satisfied with the image on the Parent Unit.
4.1 1. 4.2 1. 2. 3. 4. 4.3 1. 2. 3. 4.4 1. 2. 3. Volume While in monitor mode, press the + UP button or - DOWN button to select the desired volume level from level 1 ~ 8, or Off. (The default volume level setting is level 4.) Brightness Press the button and the first menu option will appear. Press the button to select the BRIGHTNESS icon . Press the + UP button or - DOWN button to select the desired brightness level from level 1 ~ 8. (The default brightness level setting is level 4.
4.5 Camera Control 4.5.1 1. 2. 3. 4. Add (Pair) a camera Press the button and the first menu option will appear. Press the - DOWN button three times to show the ADD CAMERA icon and press the button to select. 1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN button to select the desired Camera Unit, and press the button to start searching for a Camera Unit. The Green Audio Level LED turns on while searching.
1. 2. 3. 4. Delete a Camera Press the button. Press the - DOWN button four times to show the DELETE CAMERA icon and press the button to select. 1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN button to select the desired Camera unit, press the button then press the DOWN button to select the DELETE CAM icon . Press the button to confirm the deletion or RETURN button to exit. NOTE You cannot delete a Camera if it is the only Camera paired in the system. 4.5.4 1. 2. 3. 4.
5. Disposal of the Device (environment) At the end of the product’s life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the Product, User’s Guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
ENGLISH 7. Help Display No Display • Try recharging or replacing the Battery Pack. • Reset the Units. Disconnect the Battery Pack of the Parent Unit and unplug both the Units’ electrical power, then plug them back in. • Is the Unit turned on? Press and hold the ON/OFF button P on the Parent Unit to turn it ON. • Is the correct Camera selected? Change the Camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button P to turn it ON.
Interference Noise interference on your Parent Unit • Your Baby and Parent Units may be too close. Move them farther apart. • Make sure there is at least 3 to 6 feet (1 to 2 meters) between the 2 Units to avoid audio feedback. • lf the Baby Unit is too far away it may be out of range, try moving the Baby Unit closer to the Parent Unit. • Make sure the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
Cannot Hear Sound from the Baby Unit • The volume level in the Parent Unit may be set off or too low. Increase the volume level. . • Is the correct camera selected? Change the selected camera number. The Baby Monitor Produces a High-Pitched Noise • The Parent and Baby Units may be too close to each other. Move them further apart. • The Parent Unit speaker volume may be set too high. Decrease the volume of the Parent Unit. Help 21 ENGLISH • The screen may be in standby.
8. General Information lf your product is not working properly.... 1. 2. 3. Read this User’s Guide or the Quick Start Guide. Visit our website: www.motorolamonitors.com Contact Customer Service: US and Canada 1-888-331-3383 Email: support@motorolamonitors.com To order a replacement battery pack, contact customer service.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Products Covered Consumer Products Length of Coverage One (1) year from the date of the Products’ original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the Accessories’ original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information? To obtain service or information, please call: US and Canada 1-888-331-3383 Email: support@motorolamonitors.
FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Industry Canada Caution: To maintain the compliance with the Industry Canada’s RF exposure guideline, place the baby unit at least 20 cm from nearby persons. For body worn operation, this parent unit has been tested and meets Industry Canada RF exposure guidelines when used with an accessory that contains no metal.
Technical Specifications Baby Unit (Model: MBP622BU) Frequency 2.4 GHz to 2.48 GHz Image sensor color CMOS 0.3M Pixels Lens f 2.5mm, F 2.4 IR LED 8 pcs Power Adapter: BLJ6W060050P-U; Input: 100-240V, 50/60Hz 150mA; Output: 6V, 500mA OR Adapter: RJ-AS060500U502; Input: 100-240V, 50/60Hz 150mA; Output: 6V, 500mA WARNING Use only with provided power supply.
Frequency 2.4 GHz to 2.48 GHz Display 2.4" diagonal Display colors 16M color LCD Brightness control 8 steps Volume control 8 steps + Off Power Adapter: BLJ6W060050P-U; Input: 100-240V, 50/60Hz 150mA; Output: 6V, 500mA ENGLISH Parent Unit (Model: MBP622PU) OR Adapter: RJ-AS060500U501; Input: 100-240V, 50/60Hz 150mA; Output: 6V, 500mA WARNING Use only with provided power supply. OR Battery: Model - JUSTHIGH Ni-MH AAA 3.6V 900mAh rechargeable battery pack OR Battery: GP GPRHCH93C020, Ni-MH AAA 3.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2015 Motorola Mobility LLC. All rights reserved. US_EN Version 12.
