EN Sphere/Sphere+ Quick Start Guide
MODELS: SPHERE / SPHERE+ Frequency Band: 2.402 – 2.480 GHz Maximum RF power: 6 dBm Working temperature: 0°C~45°C Product ID: SP003 Bluetooth ID: D036169 FCC ID: VLJ-SP003 IC: 4522A-SP003 1.
1 Mode (change between Bluetooth & Aux-in input) 2 Play/Pause 3 LED Indicator (Bluetooth) 4 Microphone 5 Volume Down/Last Track 6 Volume Up/Next Track 7 Charging Indicator (Headphones) 8 Aux-in Port 9 Power Port Power switch Aux-in Status Light Charge (micro USB) MIC Volume Down Play/ Pause Volume Up
2. Pairing 1 1. Plug in power supply to the speaker power port 2. Speaker will enter into pairing mode automatically with LED flashes blue and red. 3. Pair your phone with the speaker 4. Select “Sphere” / “Sphere+” from the list 2 1. Take out the headphones from the speaker dock 2. The headphones will enter into pairing mode automatically with LED flashes blue and red. 3. Pair your phone with the speaker 4.
and Headphones are shown “connected” from the list, it means it is supported. 1 1. Place the headphones to the speaker 2. Music will stop playing from headphones and it will be charged by the speaker. Make sure the headphones is placed properly onto the speaker dock, the LED will show orange when it is successfully charged 3. Speaker will automatically connect with the phone* 4. Press Play once, music will automatically play from the speaker without the need of any operation from your phone. 2 1.
4.
5.
General information Safety, Regulatory & Legal If your product is not working properly, read this Quick Start Guide or the User’s Guide of one of the models listed on page 1. Contact Customer Service: US and Canada 1-888-331-3383 Email: support@motorolahome.com On the Web: www.motorolahome.com/support Consumer Products and Accessories Limited Warranty (“Warranty”) Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD (“BINATONE”).
EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
capacity and batteries that leak are covered by this Warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.
instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Center. To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product;(c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number.
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
