Instruction manual

! Do not tilt the filled kettle backwards, since water can spill

through the steam vent. If this happens, the kettle should be

wiped before turning it on.

! Do not take the electric cord out of the socket during operation

of the appliance. You should first turn it off.

! After using the appliance let it cool for a few minutes. After

that you can boil water in it again.

DESCRIPTION

OF COMPONENTS

Fig. A:

1. Housing

2. Hinged lid

3. Lid opening button

4. Removable filter

5. Water level scale

6. On-off switch

7. Power indicator

8. Cord storage base

BEFORE USE

Remove all packing materials from appliance;

make sure that there are no foreign items in it.

Wash internal surface of kettle with warm soapy

water, rinse carefully and wipe dry. In case of

unusual odor fill the kettle up to a maximum

level with vinegar solution (1 element of 9 %

vinegar per 20 elements of water), let the kettle

soak for an hour. Then wash out the kettle with tap water, boil

water in the kettle and pour it out.

INSTRUCTIONS FOR USE

1. Place the kettle with power base on dry hori-

zontal surface.

2. Take the kettle off the base (8), open the lid

(2) by pushing the button (3) and fill the

kettle with water.

3. Make sure the water level stays between

the minimum and the maximum marks on

the water level scale (5). Do not switch on an empty kettle.

4. Close the lid (2) and put the kettle on the base (8).

5. Put the plug in the socket making sure that the mains supply

matches the voltage requirements indicated on the appliance.

6. Switch the kettle on by the on/off switch (6). The indicator

light will go on showing that the water is being boiled.

7. The appliance will automatically turn off as soon as water boils.

You may also manually switch the kettle off before the boiling

process is complete using the on/off switch (6).