User's Manual

You can set the maximum length of the recording time of the incoming

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

Set the Recording Time of Incoming Message

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select RECORD TIME.

4. Press <MENU/OK> and <UP/DOWN> to select your desired recording

5. Press <MENU/OK> to confirm.

When the answering machine is on and takes a call, you can listen to the

caller leaving a message. You can then identify the caller and decide

whether to take the call in person. The call can be screened at the base.

Call Screening

By default, answering machine calls are played automatically through the

If you don't want the caller to be heard when leaving a message, the base

screening can be turned off.

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <MENU/OK> and <UP/DOWN> to select BS SCREENING.

4. Press <MENU/OK> and <UP/DOWN> to select OFF or ON. (The

current setting will be indicated by a *.)

5. Press <MENU/OK> to confirm the setting.

9.5.6

9.5.7

9.5.7.1 Screening at the base

messages.

time from the available options 60S, 120S, 180S or UNLIMITED. (The

base speaker and the volume can be adjusted with the VOL + and VOL -

keys on the base.

current selection is marked with an asterisk.)