User's Manual

Using the corded base:

9.6 Switching the TAM On/Off

9.6.1 Using the Direct Key

When the TAM is switched on, the TAM ON/OFF indicator will be turned on,

1. From idle mode, press <ANS ON/OFF> to switch TAM on or off.

9.6.2 Using the Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

Press <MENU/OK> and <UP/DOWN> to go to

TAM ON/OFF

Press <MENU/OK> to select between ON and OFF then <MENU/OK>

9.7 Outgoing Message Settings

Record your Outgoing Message (OGM)

You can record your own OGM for ANS & REC mode or ANSWER ONLY

mode. When you record your own OGM, it will be used when the answering

machine answers the call. If your personal OGM is deleted, the preset OGM

will be restored automatically.

9.7.1

and it will flash if there are new messages recorded.

9.7.1.1 Using the direct key

1. Make sure the TAM is set to the answer mode required, ANS & REC or

ANSWER ONLY. (see section 9.8)

Press and hold <REPEAT/OGM> until you hear a beep and

When you want to end the recording, press the <PLAY/STOP> button.

PLAYING OGM.

RECORDING appears on the Base display.

Then speak clearly from about 30cm (12 inches) away from the base to

record your personal OGM.

The base will playback your new personal outgoing message and display

If the TAM is turned off, the TAM ON/OFF indicator will be off unless there

are new messages.

Note: Press <DELETE> at any time during recording or playback to erase

your personal OGM and return to the preset OGM.

and

press <MENU/OK> to select.

to select.