Operation Manual

4.3 End a Call

During a call press <OFF> to end the call.

Put the handset on the base station or charger to end the call.

4.5 Adjust Volume

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of

During a call:

When you end the call, the setting will remain at the last selected level.

4.6 Mute a Call

You can talk to someone nearby without letting the caller hear you during a

During a call:

Press <C/MUTE> to mute the microphone and “MUTED” will display on the

Your caller cannot hear you. Press <C/MUTE> again to unmute the

Press <UP/DOWN> to select volume 1-5. The current setting is shown.

During a call, you can press <SPEAKERPHONE> to alternate between

hands-free speakerphone and normal handset use.

4.4. Handset Speakerphone

the earpiece and speaker volumes.

call.

LCD.

microphone.

4.7

In idle, press and hold <HASH/#> to turn off the handset ringer.

The "RINGER OFF" icon is displayed on the LCD.

4.8 Turn on the Keypad Lock

Note: The display will still flash the Call icon and show CALL or the Caller

Display number, when there is an incoming call, even if the ringer is

To turn the ringer back on, press and hold <HASH/#> again.

Note: You can still use <TALK> to answer a call when the handset is ringing.

To turn the keypad lock off, press and hold <STAR/*> again.

Turn off the Handset Ringer

You can lock the keypad so that it cannot be used accidentally while carrying

turned off.

it around. In idle, press and hold <STAR/*> to turn on the keypad lock, and

the <KEY LOCK> icon will display.