Operation Manual

Using the corded base:

4.18.4 Make a 3-way Conference Call

The conference call feature allows one external call to be shared with the

base and one handset or with two handsets . The three parties can

share the conversation and no additional network subscription is required.

Using a cordless handset:

During an external call:

Follow Steps 1 to 4 in section 4.18.3.

2. Press and hold the star key <*> on the calling handset to establish the

Either handset can exit the conference by pressing <OFF>, leaving the

other handset still connected to the external call.

conference call.

Using the corded base:

During the external call:

1. Follow Steps 1 to 3 in section 4.18.3 (corded).

2. Press and hold the "*" key on the calling base to establish the

Any party (base or handset) can exit the conference and leave

the other party still connected to the external call.

conference call.

During an external call:

Press <MENU/OK> to show all the other registered handset numbers,

The external call is put on hold automatically and the called handset/

Press <TALK> on the called handset or pick up the corded handset on

plus a "9".

Press <TALK OFF> on the calling handset or put the calling handset on

The external call is transferred to the called handset/base.

2. Enter the number for the handset/base you want to transfer the call to.

base rings.

the charging cradle to end the current call with the external party.

the base, to establish an internal call.