Instruction manual
View Live Video
English 11
2Set the display mode for images (ID1/2/3)
You can set the display mode for live video and played back
images. Select a setting value from the pull-down menu of each
item and click .
1 READ INTERVAL (Initial setting: 1)
The display speed for images can be selected in five levels.
The larger the numeric value, the faster the speed.
The actual display speed is influenced by the network
environment.
2 SIZE (Initial setting: 1)
The image display size can be selected from six levels. The
larger the numeric value, the larger the image.
3 QUALITY (Initial setting: 2)
The image quality of live video can be selected in three levels.
The selected image quality is applied to all channel images
connected to the DVR.
Selections:
1: Low image quality
2: Standard image quality
3: High image quality
3Playback audio (ID2/3)
You can playback live and audio of reproduced audio at the same
time.
When playing back audio, be sure the optional application
software "DVR Viewer2 (Ver.2.0.0 or higher)" is installed on the
computer beforehand. (Refer to P36)
1
Click the channel selection button.
The screen will become the full screen display and the setting
menu for [AUDIO] will display.
2
Set [AUDIO] to "ON".
Audio data is played back after being buffered for a fixed time.
When [AUDIO] is set to "ON", simultaneously select a
buffering time.
Selections:
• OFF (initial setting)
• ON-5/10/15/20/30 (seconds)
3
Click .
The audio of the image will playback.
The display speed cannot be set when [AUDIO] is
set to "ON".
Because image quality cannot be selected when
playing back images, the setting menu for
[QUALITY] is not displayed.
12 3
• The audio cannot be played back in the quad-screen
and multi-screen.
• When playing back images with audio attached, the
audio will take precedence and playback. Because
of this, there is also a possibility that the images
will not display depending on the environment.
What is buffering?
Buffering reads data in advance and saves a certain
amount.
If the buffering time is set to be long, the playback quality
will improve but time lags (delays) in the audio will occur.
1
3
23