Instruction manual

Search Recorded Images (User level: ID2/3)
16 English
1
Click "5. MOTION DETECTION SEARCH" in the
search menu.
The MOTION DETECTION SEARCH screen displays.
2
Specify a search area using "SEARCH FROM".
Select the recording area targeted for the search.
Selections:
• ALARM (alarm recording area)
• NORMAL (normal recording area)
• ALARM AND NORMAL
(Alarm/normal recording area)
3
Specify [CHANNEL].
You can specify a channel to narrow the search range. Select
"--" when a channel is not specified.
4
Specify an image range to search.
The start and stop date/time of the image recorded in the
DVR are displayed in [START] and [END].
Change the date and time of [START] and [END] when
narrowing the search range.
5
Click [SET].
The first image of the search range is displayed as a still
image in the PREVIEW screen.
6
Set the detection points for motion.
(MOTION SENSOR SET)
The setting frame of the motion detection point will display in
the PREVIEW screen as an 8 (vertical) x 10 (horizontal)
square.
If you click over the square, a red mark will display and be set
to a motion detection point. If you click again, the setting will
be cleared. Set a motion detection point to the required
portion while viewing the PREVIEW screen.
7
Set [MOTION SENSOR LEVEL].
Set the detection sensitivity of the motion sensor.
Selected value: OFF/1 (high) to 10 (low)
8
Click [PREVIEW].
Execute a motion detection search for images within a
specified search range.
When an image with movement is detected, it will display as a
still image in the PREVIEW screen.
9
Click PREVIEW screen.
Change to main screen and playback images. You can
perform normal playback operations after playback starts.
5
MOTION DETECTION SEARCH
If a motion detection search is not performed, click the
PREVIEW screen as is. Change to main screen and
playback images.
6
5
8
7
2
3
9
4
Message box
Increase the set value if you want to avoid detection of
small vibrations or movements of the object due to
factors such as wind.
When multiple images with movement are detected,
the detected images will display in order from the
oldest each time [PREVIEW] is clicked.
Message box display
Each time search conditions are set or when the [SET] or
[PREVIEW] buttons are clicked, the search status and
results will display in a message box over the PREVIEW
screen.
Display message:
• SEARCHING
• FOUND
• IMAGES NOT FOUND!