Instruction manual

Saving Images (User level: ID2/3)
18 English
B Copying Recorded Images to the DVR’s Archive Area
Copying the images that are recorded in the normal recording area and the alarm recording area to the DVR's archive area
If the [OVERWRITE] setting is set to "ON", the DVR will overwrite the previously recorded images sequentially once the recording area is
full. We recommend you store important images in the archive area.
1
Play back the images you want to copy and click
the channel selection button.
The full screen appears, you can start copying.
2
Click to freeze the images at the point where
you want to start copying.
3
Click in the operation panel.
The COPY screen is displayed.
4
Choose the [UNIT] of the images to be copied.
The images to be copied can be specified by the number of
images or the duration.
• PICTURES:
Number of images from the starting point (Total number of
images from the channel to be copied)
• TIME:
Duration from the starting point (recording time)
5
Specify the range of the images to be copied.
Specify the value for the [UNIT] you chose in step 4.
• PICTURES: Between 1 and 40,000
• TIME: Hour(s): Minute(s): Second(s)
(00:00:01 - 99:59:59)
6
Check the box of the channel to be copied.
The box of the channel being currently displayed is
automatically checked. The check cannot be removed.
• :
Checks all the channels.
• : Uncheck the channels except for the channel
being currently displayed.
7
Click .
Copying operation starts.
Once the copying operation is complete, the result of the copy
is displayed.
8
Click .
The operation returns to live video.
Use the search function to browse the recorded
images you want to play. (Refer to P14)
5
4
5
6
7
To interrupt the copying operation, click [CANCEL].
The copying operation that was performed until the
interruption is valid, therefore the images up to that
point are saved in the archive area of the DVR.
• Copy operations cannot be performed while playing
back images stored in the archive area.
• Only image data can be copied in the archive area. If
images contain audio data, only image data is
copied.
• If the archive area becomes full during the
recording operation, the copying operation will
automatically be interrupted.
Once the necessary images among the images
saved in the archive area have been downloaded to
such media as a CompactFlash, click the [AREA
FULL RESET] button under the RECORDING AREA
SET and copying operation restarts. (Refer to P25)