Instruction manual

24 English
Initial setting
(User level: ID3)
Setting the internal clock of the DVR.
Set the day/month/year/hour/minute using the pull down menu.
The day is automatically set according to the date.
Setting the automatic daylight saving change and the adjust
function of the clock of the connected DVR.
1 DAYLIGHT SAVING (Initial setting: USE)
Set the automatic daylight saving change function if the DVR is
used in a daylight saving area.
USE: Setting the automatic daylight saving change
function.
Set the daylight saving start (ON) and end (OFF)
date using [WEEK], [MONTH], [TIME].
NO USE:
Not setting the automatic daylight saving function.
2 EXT. CLOCK SET (ADJUST TIME)
It automatically adjusts the time of each DVR if more than 2 DVRs
are connected. Select the time at which all the clocks will be
adjusted using the pull down menu.
A signal is output to the clocks of the DVRs connected to the
[CLOCK OUT] terminal situated at the rear of the DVR,
everyday at the specified time, and their time adjusted to the
second.
Dates set as national holidays, anniversaries, etc are considered
as holidays and timer recording operations will be the same as for
Sundays.
Set the holiday dates using the pull down menu. Up to 20 dates
can be set.
A
CLOCK SET
If the clock if not set on the DVR, recording and camera
control operations are not possible.
B
DAYLIGHT SAVING/EXT. CLOCK SET
1
2
C
HOLIDAY SET