Instruction manual

English 25
Recording settings
(User level: ID3)
The proportion of each recording area on the internal HDD is
displayed. Recording operations will stop once the recording area
is full. However, recording operations can be resumed by clicking
the [AREA FULL RESET] button.
1 Recording area capacity display
The capacity of each recording area (proportion) specified
using the RECORDING AREA SET function of the DVR is
displayed. This cannot be changed using the computer.
2 [AREA FULL RESET] button
This button is displayed depending on the settings of
[OVERWRITE] in RECORDING CONDITIONS SET.
Recording operations will stop once the space available on
each recording area is insufficient. To resume the recording
operations using overwrite, click [OVERWRITE]. This operation
is called [AREA FULL RESET].
• Normal/Alarm recording area settings
The button is only displayed if [OVERWRITE] is set to
"OFF".
• Archive area settings
Buttons that are always displayed.
A
RECORDING AREA SET
Images are recorded (saved) on each recording area
according to the recording method chosen.
Recording area Recording method
NORMAL RECORDING
AREA
Normal recording (manual
recording)
Timer recording
ALARM RECORDING
AREA
Alarm recording
Pre-alarm recording
ARCHIVE AREA Copy (Save)
Setting [MIRRORING] to "ON" in the HDD SET of the
DVR will display the disk capacity of the disk with
the lowest capacity.
2
1
• If [OVERWRITE] is set to "ON" for the normal
recording and the alarm recording area, or if the
normal recording area or alarm recording area is set
to "0%" the [AREA FULL RESET] button is not
displayed.
• Resuming the recording operations using the
[AREA FULL RESET] button, will only overwrite the
data once. Full disk will result in the interruption of
recording operations.
To lock the DVR to overwrite mode set
[OVERWRITE] to "ON".
• The [AREA FULL RESET] is not available if there is
still space available on each recording area.