Instruction manual

Recording settings (User level: ID3)
English 27
It allows you to set the recording conditions of the normal
recording and timer-controlled recording of the DVR.
The quality of the image depends on "image quality x recording
rate". The higher frequency recording rate of the image, the higher
the quality of the image. However, the amount of disk space
needed to record these images is proportional to the quality of the
image. Therefore, selecting a more quality image will result in
shortened recording time.
1 PICTURE QUALITY (Initial setting: ENHANCED)
It allows you to set the quality of the image recorded by the
DVR.
Selecting a high quality image will result in shortened recording
time.
Selections:
BASIC: Basic image quality
NORMAL: Normal image quality
ENHANCED: Enhanced image quality
FINE: Fine image quality
SUPER FINE: Super fine image quality
2 AUDIO RECORDING (Initial setting: OFF)
Simultaneous audio recording is possible for normal and
timer-controlled recording.
ON: Simultaneous audio recording on
OFF: Audio recording off
3 REC RATE (Initial setting: 15 FPS)
To set the recording rate for normal recording.
The letter "A" is displayed in front of the available recording
rate.
Available settings:
60, 30, 20, 15, 10, 7.5, 6, 5, 4.286, 3.75, 3.333, 3, 2.727, 2.308, 2,
1.667, 1.429, 1.25, 1.111, 1, 0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033
(Unit: FPS)
4 REC PROGRAM GROUP (Initial setting: OFF)
Recording conditions preset using PROGRAM REC SET
(program number) can be selected. (Refer to P28)
Selections: OFF, P-1, P-2, P-3, P-4
OFF: Programed recording is not used.
A common recording rate for all the connected
cameras is set using [REC RATE] on this screen.
P-1 - P-4:
The DVR records the images at the rate programed
for each camera.
5 Recording duration
Clicking [SAVE], displays, for your reference, a rough recording
duration estimate according to the set recording rate.
C
NORMAL REC MODE SET
• Audio data is recorded in the same recording
area as the images. Therefore, recording time is
shortened.
• If recording audio, set the recording rate between
"1 - 60 FPS".
1
2
3
4
5
About the Recording Rate
• If multiple cameras are connected to the DVR, the
recording rate of each channel varies according
to the number of cameras connected.
• If you use PROGRAM REC SET to program the
recording rate of each individual camera, the
recording rate cannot be set using NORMAL REC
MODE SET.
• Recording rates available are limited when
pre-alarm recording or mirroring is set to "ON".
Refer to the DVR manual for more information.
• Use the TIMER SET to program the recording rate
when using timer recording. (Refer to P28)