Instruction manual

Recording settings (User level: ID3)
28 English
If multiple cameras are connected to the DVR, the recording rate
of each camera can be set individually.
4 recording settings can be preset (P-1 - P-4). Pre-programed
settings can be used for NORMAL REC MODE SET and TIMER
SET.
1 PROGRAM
Specify a program number and set the recording rate for an
individual camera using 2. Different recording rates can be set
for each program.
Selections: P-1, P-2, P-3, P-4
2 SELECT INDIVIDUAL CAMERA RATE (FPS)
Select the recording rate for an individual camera.
By setting the rate of an individual camera rate to "OFF", no
images are recorded even if a camera is connected.
Available settings:
OFF, 30, 15, 7.5, 3.75, 1.875, 1, 0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033
(Unit: FPS)
3 [SAVE] button
Clicking [SAVE] will save the settings of the selected program.
4 NORMAL REC
Once the program has been saved the estimated normal
recording time is displayed.
It allows you to set the recording conditions for timer recording.
1 WEEK
To set the day for the timer-controlled recording.
To set the timer recording to the same time every day set to
"DLY".
2 START/STOP
Set the timer recording start and stop time.
3 PROGRAM (Initial setting: OFF)
You can select a program that has been preset (P-1 - P-4)
using PROGRAM REC SET.
4 FPS (Initial setting: 15 FPS)
To set the recording rate of the timer recording.
If the rate was set using [PROGRAM], the preset recording rate
will be used.
5 SET (Initial setting: OFF)
Select "ON" to enable the settings programed in this row. The
timer recording will start and stop accordingly.
Multiple timer controlled recording periods may be used to
divide recording times according to the conditions set.
6 EXT
If using an external timer set 3, 4 and 5.
The recording will occur according to the incoming signal of the
external timer. There is no need to set the day or start and stop
time.
7 [OVER 24H] button
When recording continuously for a period of over 24 hours
using the timer recording, click this button to display the
appropriate program screen.
8 [SAVE] button
Clicking [SAVE] will save the timer settings.
D
PROGRAM REC SET
• The menu screen may vary according to the DVR
model.
• Recording rates available are limited when pre-alarm
recording or mirroring is set to "ON". Refer to the
DVR manual for more information.
1
2
3
4
(Example screen for the 16-channel model)
E
TIMER SET
1 2 3 4 5
6
7
8