Instruction manual

Recording settings (User level: ID3)
English 29
bExample of timer-controlled recording
Set the timer-controlled recording conditions based on the
following example.
To operate the timer recording click in the operation panel.
The following message is displayed in the operating mode display
panel when timer controlled recording is on.
• Standby: TIMER STANDBY
• Timer recording: TIMER RECORDING
Example: Setting the timer to every Sunday from 7:30 to 18:00,
recording rate of 30 FPS
1
Setting the timer-controlled recording conditions.
1 Set [WEEK] to "SUN"
2 Set [START] to "7:30" and [STOP] to "18:00"
3 Set [PROGRAM] to "OFF"
4 Set [FPS] to "A 30 FPS"
5 Set [SET] to "ON"
Set other timer-controlled recording conditions through the same
procedure. You can set up to eight timer recordings.
2
Click .
The timer setting is complete.
Example: Recording every day from 10:00 to 20:00 using the "P-1"
recording pattern.
1
Setting the timer-controlled recording conditions.
1 Set [WEEK] to "DLY"
2 Set [START] to "10:00" and [STOP] to "20:00"
3 Set [PROGRAM] to "P-1"
4 Set [SET] to "ON"
2
Click .
The setting of the timer recording conditions is complete.
Example: Setting the timer to record 30 hours every Saturday
from 16:00 to 22:00 the next day, recording rate of
30 FPS
1
Click [OVER 24H].
The last two rows (rows 7 and 8) used for over 24 hours timer
recording are displayed.
2
In the first row, set the day and time start of the
recording.
1 Set [WEEK] to "SAT".
2 Set [START] to "16:00".
3
In the second row, set the day and time at which the
recording will stop and the recording conditions.
3 Set [STOP] to "22:00".
4 Set [PROGRAM] to "OFF"
5 Set [FPS] to "A 30 FPS"
6 Set [SET] to "ON"
4
Click .
The over 24 hours timer recording is set.
To set the timer by day
Timer
button
Operating mode display panel
1 2 3 4 5
Recording at the same time every day using timer
recording
Setting the timer for continuous recording lasting more
than 24 hours
Only one over 24-hour timer recording program can be
set.
If timer recordings overlap.
Priority is given as follows "Day timer → Daily timer →
External timer".
If the both the day timer and the daily timer overlap, the
timer will start recording according to the program that
starts earliest. If the start time is the same, the recording
will be prioritized starting from the upper row.
1 2 3 4
1 2
43 65
1
2
3