Instruction manual

Recording settings (User level: ID3)
English 31
5 PRE-ALARM RECORDING
Allows you to set the pre-alarm recording operation mode.
ON: Activates pre-alarm recording.
OFF: Pre-alarm recording is not activated.
A REC RATE (Initial setting: 15 FPS)
It allows you to set the pre-alarm recording rate.
Available settings:
30, 20, 15, 10, 7.5, 6, 5, 4.286, 3.75, 3.333, 3, 2.727, 2.308, 2,
1.667, 1.429, 1.25, 1.111, 1 (Unit: FPS)
B DURATION (Initial setting: 1 MIN)
To set the duration of the pre-alarm recording.
Available settings:
3, 5, 10, 20, 40 SEC, 1, 2, 3, 4, 5, 10, 15 MIN
6 ALARM TRIGGER (Initial setting: ALARM)
It allows you to set under what conditions the alarm recording is
triggered.
Selections:
ALARM (External alarm):
When an alarm signal is input to the alarm input terminal at
the rear of the DVR
SENSOR (Motion sensor):
When the motion sensor detects movement
ALARM AND SENSOR:
When both the external alarm and the motion sensor are
triggered at the same time
ALARM OR SENSOR:
When either the external alarm or the motion sensor is
triggered
7 Number of alarm recordings
Clicking [SAVE], displays, for your reference, the number of
alarm recordings that can be recorded according to the set
conditions.
F
ALARM REC MODE SET (Continued)
If the alarm recording operation mode is set to
"OFF", "***" is displayed and pre-alarm recording
cannot be set.