Instruction manual

General settings (User level: ID3)
34 English
The NETWORK SET allows you to set the network before the
DVR is connected to it. The menu on this screen enables you to
change DVR settings through the computer.
1 IP ADDRESS / SUBNET MASK / GATEWAY
Input values between "0 - 255"
2 PORT
Normally set to "80".
3 PASSWORD SETTING
It allows you to set a confirmation password according to each
user level. Type a password in each appropriate box.
Choose a 4 to 8 alphanumeric character password.
4 NETWORK SPEED (Initial setting: NO LIMIT)
It allows you to set the network transmission speed.
Available settings:
NO LIMIT, 64, 128, 256, 512, 1024Kbps
Displays the interface information set through the DVR when using
the system controller operations.
1 DATA SPEED (Unit: bps)
Shows the data transmission speed.
2 STATUS INFO
Displays the state of the transmission of the status information.
3 ALARM INFO
Displays the state of the transmission of the alarm information.
4 ADDRESS
Shows the set address.
D
NETWORK SET
After changing the network settings, switch to the DVR operations.
Reconnect the DVR with the network.
To choose a PORT setting other than the preset "80" add ":
(colon)" after the IP address and the PORT number.
<Example when setting PORT to 81>
http://192.168.0.1:81/
User level ID1 ID2 ID3
User name ID1 ID2 ID3
Operations allowed
Live video monitoring
mmm
Playback
mm
Camera control
mm
Recording
m
DVR settings
m
Password (initial setting) 1111 2222 3333
Restarting or resetting the DVR will restore initial
setting (NO LIMIT).
2
3
4
1
E
RS-485 SET
1
2
3
4